Description
The Max Ultra Backrest is a wheelchair back that Future Mobility Healthcare builds in Mississauga, Ontario, with laterals set 3 in (76 mm) higher than the Prism Ultra.
Browse wheelchair backrests.
Who is it for?
- This back suits a rider of up to 250 lbs (113 kg) whose prescription asks for firm support higher along the sides of the trunk, on a chair with round back posts.
- Choose the right back in a seating assessment with an occupational therapist or physiotherapist.
Will it fit?
- Sizes: 14 combinations, 14 x 14 to 20 x 20 in. Six sizes (16 x 16, 16 x 20, 18 x 16, 18 x 20, 20 x 16 and 20 x 20 in) are stock, and the other eight are made to order.
- Part numbers: MUB plus width and height, so MUB1818 is 18 by 18 in. Custom sizes are made to order, and bariatric widths reach 24 in.
- Chair width: standard pins fit the back to the same width; extension pins, sold separately, fit frames 1 or 2 in (25 or 51 mm) wider.
How does it work?
- The shell is 5052 grade aluminium, padded with high density foam and finished with a breathable air mesh spandex cover; an 18 x 16 in back weighs 5 lbs (2.3 kg).
- The side section is 9 in (229 mm) tall on a 14 in high back and 10 in (254 mm) tall on the 16, 18 and 20 in backs.
- Quick-release plates and cane clamps fit 1 in (25 mm) posts, with inserts for 7/8 in (22 mm). Height adjusts on the clamps, depth moves through 5 in (127 mm) and angle adjusts 15 degrees forward and 20 degrees back, with depth and angle set while the person is seated.
- Three sets of holes along the top edge take a headrest adaptor bracket.
What are the care limits?
- The cover comes in black, royal blue, navy blue, dark green or burgundy; a 4-way stretch or moisture-resistant infection-control cover is available on request.
- Machine wash the cover cold on a gentle cycle with mild detergent, without bleach or fabric softener, and air dry it in the shade; never machine dry it.
- The warranty is 3 years on the back, 1 year on the hardware and 90 days on the cover; see the Warranty tab and our warranty service.
How does it compare?
- The Prism Ultra Back is the base back with lower laterals.
- The Prism TrueFitt Back uses trimmable cube foam.
- The Lunar Heavy Duty mid support is a 500 lb back with a ribbed shell.
What should you know?
Funding may help: see who may help pay.
Custom and specially ordered backs are non-returnable; see our return policy.
Frequently asked questions
Can a headrest go on this back?
Yes. Three sets of holes along the top edge of the shell take a headrest adaptor bracket.
Will it clamp onto my wheelchair's back posts?
Round posts of 1 inch (25 mm) fit directly; 7/8 inch (22 mm) posts need the Santoprene inserts that come in the kit.
Can it be fitted while the person is sitting in the chair?
Depth and tilt can be set with the rider in place: slacken the adjustment screws on each plate, slide or tilt the back, then retighten.
Specifications
- Weight capacity
- 250 lbs (113 kg)
- Product weight
- 5 lbs (2.3 kg), 18" x 16" back
- Sizes
- W x H in inches: 14x14, 16x16, 16x18, 16x20, 17x16, 17x20, 18x16, 18x18, 18x20, 19x16, 19x20, 20x16, 20x18, 20x20
- Construction
- 5052 grade aluminum shell, high density foam pad, breathable air mesh spandex cover
- Cover
- Air mesh spandex cover in 5 colours; 4-way stretch or moisture-resistant infection control cover on request
- Cover care
- Machine wash cold on gentle with mild detergent; no bleach or fabric softener; air dry in the shade, no dryer
- Adjustments
- Height on the back posts; depth over 5" (127 mm); angle 15 degrees forward to 20 degrees back; depth and angle set with the user seated
- Custom sizes
- Made to order up to 20" (508 mm) wide and from 11" (279 mm) high, by quote; bariatric custom to 24" (610 mm) wide
- Back width
- 14", 16", 17", 18", 19" or 20" (356 to 508 mm); bariatric 21" to 24" (533 to 610 mm)
- Back height
- 14", 16", 18" or 20" (356 to 508 mm); custom from 11" (279 mm)
- Lateral support
- Set 3" (76 mm) higher than the regular Prism backs; side section 9" (229 mm) on a 14" back, 10" (254 mm) on 16" to 20" backs
- Mounting hardware
- Quick-release plates with cane clamps for 1" (25 mm) back posts; inserts included for 7/8" (22 mm) posts
- Fits wheelchair widths
- Same width as the back with standard pins; frames 1" or 2" (25 or 51 mm) wider with extension pins, sold separately
- Available colours
- Black, royal blue, navy blue, dark green and burgundy covers
- Warranty
- 3 years on the back, 1 year on hardware, 90 days on the cover; original purchaser
- Product type
- Rigid wheelchair back with raised laterals, aluminum shell with foam
- Use category
- Postural support; laterals set higher than the regular Prism backs
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Future Mobility Healthcare warrants the Max Ultra back to be free from defects in materials and workmanship under normal use by the original purchaser.
- Back: 3 years.
- Hardware: 1 year.
- Cover: 90 days.
- Covers the original purchaser only. Defective parts are repaired or replaced at Future Mobility's discretion; labour and shipping are not included.
- Excludes normal wear, not following the instructions, negligence, accident, improper use, maintenance or storage, and unauthorized parts, modifications or repairs.
- Claims go through the dealer that sold the back.
Compare similar products
Other models worth a look before you decide.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







