Description
The Prism Basic Back is the plainest back in Future Mobility Healthcare's Prism line: a curved aluminium shell, a foam pad and a cover, held on by quick-release hardware.
Browse wheelchair backrests.
Who is it for?
- It suits a wheelchair user whose therapist calls for mild to moderate postural support, who wants a rigid shaped back rather than fabric upholstery, and who weighs 250 lbs (113 kg) or less.
- It has no side laterals; the Prism Ultra adds them and the Prism TrueFitt shapes cube foam.
- Choose the right back in a seating assessment with an occupational therapist or physiotherapist.
Will it fit?
- Sizes: eight non-standard sizes, 14, 16, 17, 18, 19 or 20 in wide by 14, 16, 18 or 20 in high, with part numbers from BB1414 to BB2018; BB1818 is 18 by 18 in.
- Other groups: the six stock sizes are separate, and a custom size is made to order up to 20 in wide and at least 11 in high.
- Width: order at the seat width or up to 2 in (51 mm) narrower; the back fits frames up to 2 in wider than itself when longer pins are fitted, sold separately.
- Weight: the 18 by 16 in back weighs 4.75 lbs (2.2 kg).
How does it work?
- Shell and foam: a 5052 grade aluminium shell lines with a replaceable foam pad and closes in a cover.
- Mounting: two plates clamp to the posts; press the left release lever until it latches open, then the right, and the back lifts off.
- Adjustment: depth moves through 5 in (127 mm) forward and back, angle 15 degrees forward and 20 degrees back, set with the person seated; alternate slots change height by 7/8 in (22 mm).
- Posts and headrest: clamps fit 1 in (25.4 mm) posts with inserts for 7/8 in (22.2 mm); three sets of top holes take a headrest bracket that shifts 1.5 in (38 mm).
What are the care limits?
- Machine wash the cover cold on a gentle cycle with mild detergent, without softener or bleach, and air dry out of the sun; never machine dry it.
- Keep the cover on the foam: it protects against incontinence and is fire retardant. The foam pad is replaceable.
- The warranty is 3 years on the back, 1 year on the hardware and 90 days on the cover; see the Warranty tab and our warranty service.
How does it compare?
- The Prism Ultra adds 6 in of built-in lateral support.
- The Prism TrueFitt uses 2 in cube foam shaped for kyphosis, lordosis or scoliosis.
- The Lunar Basic mid support is a contoured shell with replaceable foam.
What should you know?
Mobility Specialties is an ADP registered vendor; see how we can help.
Custom and specially ordered backs are non-returnable; see our return policy.
Frequently asked questions
Does the Prism Basic Back have side supports?
No. It supports the back only, and no lateral add-ons are offered for this model.
Will the Prism Basic Back fit my wheelchair?
It fits wheelchairs with round back posts of 1" (25.4 mm), or 7/8" (22.2 mm) using the rubber inserts in the hardware kit.
Can a headrest be mounted on the Prism Basic Back?
Yes. The shell has three sets of holes along its top edge for a headrest adaptor bracket.
Specifications
- Weight capacity
- 250 lbs (113 kg)
- Product weight
- 4.75 lbs (2.2 kg), 18" W x 16" H
- Sizes
- Eight non-standard sizes, BB1414 to BB2018: 14, 16, 17, 18, 19 or 20 in wide by 14, 16, 18 or 20 in high
- Construction
- 5052 grade aluminum shell with a replaceable foam pad
- Cover
- Removable outer cover: 4-way stretch, or infection control in Recovery 5 moisture-resistant fabric
- Cover care
- Machine wash cold, gentle cycle, mild detergent; no softener or bleach; air dry out of the sun, do not machine dry
- Adjustments
- 5" (127 mm) depth range; angle 15 degrees forward to 20 degrees back; set with the user seated
- Custom sizes
- Made to order up to 20" (508 mm) wide and at least 11" (279 mm) high, by quote
- Back width
- 14", 16", 17", 18", 19" or 20" (356 to 508 mm)
- Back height
- 14", 16", 18" or 20" (356 to 508 mm)
- Lateral support
- None built in
- Mounting hardware
- Quick-release mounting plates with cane clamps for 1" (25.4 mm) posts; inserts included for 7/8" (22.2 mm) posts
- Fits wheelchair widths
- Seat frames up to 2" (51 mm) wider than the back, with longer mounting pins sold separately
- Warranty
- 3 years on the back, 1 year on hardware, 90 days on the cover (limited, original purchaser)
- Product type
- Rigid wheelchair back, aluminum shell with foam
- Use category
- Mild to moderate postural support
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Future Mobility Healthcare warrants the Prism Basic back to be free from defects in materials and workmanship under normal use by the original purchaser.
- Back: 3 years.
- Hardware: 1 year.
- Cover: 90 days.
- Covers the original purchaser only. Defective parts are repaired or replaced at Future Mobility's discretion; labour and shipping are not included.
- Excludes normal wear, not following the instructions, negligence, accident, improper use, maintenance or storage, and unauthorized parts, modifications or repairs.
- Claims go through the dealer that sold the back.
Compare similar products
Other models worth a look before you decide.
Funding may help pay for this
Mobility Specialties is an ADP registered vendor. Funding may help: see who may help pay.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







