Description
The Prism Ultra Back is a rigid wheelchair back from Future Mobility with replaceable foam and 6 in (152 mm) of built-in lateral support.
Browse wheelchair backrests.
Who is it for?
- The Prism Ultra Back suits a wheelchair user up to 250 lbs (113 kg) whose prescription calls for a firm, shaped back with side support, on a chair with round back posts.
- Choose the right back in a seating assessment with an occupational therapist or physiotherapist.
Will it fit?
- Stock sizes: six, from 16 x 16 to 20 x 20 in. Non-stock sizes fill the gaps from 14 x 14 to 20 x 18 in, and custom sizes are made up to 20 in wide and from 11 in high.
- Part numbers: UB plus width and height, so UB1616 is 16 by 16 in.
- Chair width: the standard pins fit the back to the same width; extension pins, sold separately, fit frames 1 or 2 in (25 or 51 mm) wider.
How does it work?
- The back is a 5052 grade aluminium shell with a replaceable foam pad and a removable outer cover; an 18 x 16 in back weighs 5 lbs (2.3 kg).
- The shell's lower sides curve forward into laterals 10 in (254 mm) tall on a 14 in high back and 12 in (305 mm) tall on 16 to 20 in backs.
- It mounts on two cane clamps and quick-release plates. Height adjusts on the clamps, depth moves through 5 in (127 mm) forward and back, and angle adjusts 15 degrees forward and 20 degrees back, with depth and recline set while the person is seated.
- Release the left lever until it latches open, then the right, and the back lifts out of the upper slots. Three sets of top holes take a headrest bracket that shifts 1.5 in (38 mm).
What are the care limits?
- Always use an intact cover and replace it if torn. Machine wash cold with mild detergent, no bleach or softener; air dry in the shade.
- The cover is a 4-way stretch outer or a moisture-resistant infection control cover. The foam pad is replaceable.
- The warranty is 3 years on the back, 1 year on the hardware and 90 days on the cover; see the Warranty tab and our warranty service.
How does it compare?
- The Prism Basic is a rigid foam-padded back with no laterals.
- The Prism TrueFitt uses 2 in cube foam shaped for kyphosis, lordosis or scoliosis.
- The Lunar Basic mid support is a contoured shell with replaceable foam.
What should you know?
Mobility Specialties is an ADP registered vendor; see how we can help.
Custom and specially ordered backs are non-returnable; see our return policy.
Frequently asked questions
Will the Prism Ultra Back fit my wheelchair's back posts?
It fits round 1-inch posts directly, or 7/8-inch posts with compatible inserts. Confirm the selected mounting kit and wheelchair stability with your fitter.
Can a headrest be mounted on the Prism Ultra Back?
Yes. The top edge of the shell has three sets of holes for a headrest adaptor bracket.
Can the back be adjusted while the person sits in the wheelchair?
A clinician sets depth and recline with the person seated, then tightens the screws. Moving the back changes wheelchair stability; reassess the chair after adjustment.
Specifications
- Weight capacity
- 250 lbs (113 kg)
- Product weight
- 5 lbs (2.3 kg), 18" x 16" back
- Sizes
- Stock 16x16, 16x20, 18x16, 18x20, 20x16, 20x20; non-stock adds 14x14, 16x18, 17x16, 17x20, 18x18, 19x16, 19x20, 20x18; UB + width + height
- Construction
- 5052 grade aluminum shell, replaceable foam pad, removable outer cover
- Cover
- 4-way stretch outer cover or moisture-resistant infection control cover
- Cover care
- Always use an intact cover; replace if torn. Machine wash cold with mild detergent; no bleach or softener; air dry in shade, no dryer
- Adjustments
- Height on posts; depth 5 in (127 mm); angle 15° forward to 20° back. Clinician sets with user seated, tightens screws and checks stability
- Custom sizes
- Made to order up to 20" (508 mm) wide and from 11" (279 mm) high, by quote
- Back width
- 14", 16", 17", 18", 19" or 20" (356 to 508 mm)
- Back height
- 14", 16", 18" or 20" (356 to 508 mm)
- Contour depth
- 6" (152 mm) lateral contour
- Lateral support
- Built into the shell; lateral sides 10" (254 mm) tall on a 14" high back, 12" (305 mm) on 16" to 20" backs
- Mounting hardware
- Quick-release plates and cane clamps; confirm selected kit for round 1 inch (25 mm) posts, or 7/8 inch (22 mm) posts with compatible inserts
- Fits wheelchair widths
- Same width as the back with standard pins; frames 1" or 2" (25 or 51 mm) wider with extension pins, sold separately
- Warranty
- 3 years on the back, 1 year on hardware, 90 days on the cover; original purchaser
- Product type
- Rigid wheelchair back with built-in laterals, aluminum shell with foam
- Use category
- Postural support, mild to moderate
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Future Mobility Healthcare warrants the Prism Ultra back to be free from defects in materials and workmanship under normal use by the original purchaser.
- Back: 3 years.
- Hardware: 1 year.
- Cover: 90 days.
- Covers the original purchaser only. Defective parts are repaired or replaced at Future Mobility's discretion; labour and shipping are not included.
- Excludes normal wear, not following the instructions, negligence, accident, improper use, maintenance or storage, and unauthorized parts, modifications or repairs.
- Claims go through the dealer that sold the back.
Compare similar products
Other models worth a look before you decide.
Funding may help pay for this
Mobility Specialties is an ADP registered vendor. Funding may help: see who may help pay.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







