Skip to Content Skip to main content Skip to content
Showroom hours

ADP registered vendor. Help with ODSP, March of Dimes, WSIB, VA and IFHP. ADP registered vendor. See if you qualify

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Drive Medical

AquaSense 770-406 Adjustable Transfer Bench

The AquaSense 770-406 is an adjustable transfer bench that spans the bathtub wall, with two legs in the tub and two on the floor. It is rated 250 lb (113 kg), 26 in wide, and sets from 18 to 22 in high.

Weight capacity
250 lbs (113 kg), sitting
Seat height
18" to 22" (45.7-55.9 cm), 0.47" steps
Overall width
26"66 cm
Backrest
Included, with a hand opening
Armrests
One removable push-button arm
Warranty
Lifetime limited, original user
$ 242.00 $ 242.00

What is included?

The bench, four legs with non-skid tips, the back and one push-button armrest. No tools are needed.

Offers and rewards Applied in your cart at checkout.
  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
770-406
Brand
Drive Medical
Category
Transfer Bench
Barcode 7540212102992 7540212102992

Barcode: 7540212102992

Description

The AquaSense 770-406 is an adjustable transfer bench that spans the bathtub wall: two legs stand in the tub and two on the floor, so a person sits outside and slides across. It is rated 250 lb (113 kg), is 26 in (66 cm) wide, and sets from 18 to 22 in (45.7 to 55.9 cm) high.

What does it do and how does it work?

  • Frame: anodized aluminum, with a blow-moulded plastic seat and back.
  • Seat height: push pins set the four legs from 18 to 22 in (45.7 to 55.9 cm), in 0.47 in (1.2 cm) steps.
  • Width: 26 in (66 cm) overall.
  • Back: a back with a hand opening clicks into the rear of the seat.
  • Arm: one push-button armrest clicks into the side and lifts off for the transfer.
  • Tips: a non-skid tip on each leg, not a suction cup.

Who is it for, and who should choose something else?

  • It suits a person who can sit outside the tub and slide across while seated.
  • Choose the Drive 12011KD-1 for a 400 lb (181 kg) bench with a reversible back.
  • Choose the Drive RTL12075 for a seat that slides and locks along the bench.
  • Choose a bath bench if the person can step into the tub.

Will it fit?

  • The bench is 26 in (66 cm) wide; measure the tub wall and the space beside it.
  • The seat sets from 18 to 22 in (45.7 to 55.9 cm); set all four legs to the same height.
  • The inside legs need a flat tub floor.
  • Book a free home assessment to measure the wall and the room.

Using it day to day

  • Snap the four legs into the seat frame until each push button clicks.
  • Click the back into the rear and the arm into the side.
  • Set the height, then check every push button before use.
  • Sit down outside the tub and slide across; do not stand on the seat.

What does it work with, and what are its limits?

  • It carries 250 lb (113 kg) for sitting.
  • It has one arm only; the other side is open for the transfer.
  • The legs use non-skid tips rather than suction cups.
  • Lifetime limited warranty for the original user; see the Warranty tab.
  • Bathroom safety items are non-returnable once used, so measure first.

How does it compare?

More transfer benches.

Frequently asked questions

Can the back go on the other side?

The back fits the rear of this seat. For a reversible back, the Drive 12011KD-1 is the bench to choose.

Can someone stand on the seat?

No. The 250 lb (113 kg) rating is for sitting, not standing.

Are the leg tips suction cups?

No. Each leg has a non-skid rubber tip; suction cups are not part of this bench.

Funding may help: see who may help pay. Read the return policy before you open the carton.

Specifications

Weight capacity
250 lbs (113 kg), sitting
Assembly
Push-button legs; back and arm click in; no tools
Leg tips
Non-skid tip on each leg
Armrests
One removable push-button arm
Backrest
Included, with a hand opening; fits the rear of the seat
Seat height
18 to 22 in (45.7-55.9 cm)
Height adjustment
Push pins, 0.47 in (1.2 cm) steps, no tools
Overall width
26 in (66 cm)
Folding
Ships knocked down; does not fold
Uses
Seated transfer across a bathtub wall
Material
Blow-moulded plastic seat and back, anodized aluminum frame
Warranty
Lifetime limited to the original user; non-durable parts, alterations, abuse, misuse and accidental damage excluded
Product type
Transfer Bench

Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Warranty details

Drive Medical warrants the AquaSense Adjustable Transfer Bench (770-406) to be free from defects in materials and workmanship for the life of the original user.

  • Term: lifetime limited.
  • Covers the original user only.
  • Excludes non-durable parts that wear and need replacement.
  • Void after alterations, abuse, misuse or accidental damage.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.

Not sure where to start?

Talk to a specialist. No pressure, no obligation.

Book a free visit