Description
The Drive 13008 is a tilt-top overbed table on a chrome-plated steel H base, with a walnut-look laminate top that tilts 33 degrees each way.
What does it do and how does it work?
- Tilts 33 degrees each way for reading or meals.
- Height adjusts between 29.5 and 46 in (75 and 117 cm).
- The top locks when the height handle is released.
- Swivel casters and a 15.5 by 26.5 in (39 by 67 cm) H base.
- Supports 50 lb (23 kg); the table weighs 21 lb (9.5 kg).
Who is it for, and who should choose something else?
- For meals, reading, glasses, a phone or books at the bedside.
- For a room where the base rolls under the bed.
- Not a walker, a stand-aid, a transfer aid, or a fixed-level table.
Will it fit?
- Match the 29.5 to 46 in height to the mattress.
- The base is 15.5 by 26.5 in and must roll under the frame.
- Spread the load evenly, and use the lowest height that still clears the mattress.
Using it day to day
- Lift under the top to raise it. Squeeze the trip lever and push down at the column to lower it.
- Loosen the triangle knob, set the tilt, then tighten the knob.
- Check the hardware before each use. Do not use the table if it is damaged or unsteady.
What does it work with, and what are its limits?
- A free-standing indoor table, not part of the bed frame.
- Two casters lock, on the column end of the base. The two opposite the column do not.
- Not for a television, a computer monitor, or a hot appliance, and not near an open flame.
- Limited lifetime warranty for the original buyer. Casters are wear parts and are not covered. See warranty.
- Other add-ons are under bed accessories.
How does it compare?
- Drive non-tilt overbed table: a fixed level top.
- Drive pivot tilt overbed table: a different tilt mechanism.
- Bed tables: the rest of the range.
Frequently asked questions
When do I swap the black assembly screw?
Only after the table stands upright on its casters. Then fit the chrome screw from the hardware pack.
What if the bottom chrome screw is removed?
Leave the screw marked do not remove in place. Taking it out damages the spring and voids the warranty.
Can I assemble it with a power drill?
No. Tighten the bolts by hand. Do not over-tighten them, and do not use power tools.
Funding may help: see who may help pay.
Specifications
- Weight capacity
- 50 lbs (23 kg)
- Product weight
- 21 lbs (9.5 kg)
- Overall width
- 26.5 in (67 cm) H base
- Height range
- 29.5 to 46 in (75 to 117 cm), infinite settings
- Sold as
- One table per carton, model 13008
- Available colours
- Walnut wood grain
- Material
- Walnut wood-grain low-pressure laminate top; chrome-plated steel H base
- Warranty
- Limited lifetime
- Product type
- Tilt-top overbed table
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Drive Medical warrants the deluxe tilt-top overbed table (13008) to be free of defects in materials and workmanship for the lifetime of the product, for the original consumer purchaser.
- Term: lifetime limited.
- Excludes failure from owner misuse or negligence, and normal wear and tear.
- Excludes non-durable parts that wear and need periodic replacement, such as casters, rubber accessories and grips.
Compare similar products
Other models worth a look before you decide.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
