Description
The MBA-CPH is Golden's phone holder for a Buzzaround or LiteRider tiller. Two screw mounts clamp to a pipe on the drive control, and a spring grip holds the phone beside the controls.
What does it do and how does it work?
- The holder puts a smart phone beside the throttle, so directions and calls stay in view.
- Two screw mounts tighten over any pipe on the drive control tiller.
- The spring-loaded grip opens for most large phones and closes on the phone.
- It holds the phone only; there is no cable or charging connection.
Who is it for, and who should choose something else?
- A Buzzaround or LiteRider owner who wants the phone in reach without holding it.
- It fits Golden Buzzaround and LiteRider tillers. GB121, GB124 and the GR595 have their own holder numbers.
- To charge while you ride, use the phone's own cable and a power bank; the holder has no connection.
Will it fit?
- Look for a round pipe on the drive control that the two clamps can close around.
- The grip is sized for most large phones; a very thick case may sit loosely.
- The holder comes with its two screw mounts; the phone is not included.
- It is listed for Golden scooters. A LiteRider GL111 is one of them. GB121 and GB124 use holder MBA-0005, and the GR595 uses MBA-0002. See the scooter range.
What does it work with, and what are its limits?
- The spring grip holds the phone by pressure, not with a locking cradle.
- It does not charge the phone or connect it to the scooter.
Frequently asked questions
Will it fit my Pride scooter?
No. It is made for the control tiller of Golden Buzzaround and LiteRider scooters.
Can the holder power my phone?
No. There is no cable or charging connection; charging stays with the phone's own cable.
Will it hold a phone in a thick case?
It holds most large phones by spring pressure. Test a very thick case before you ride.
If the clamp does not fit, our service team can help.
Funding may help: see who may help pay.
Specifications
- Tiller
- Two screw mounts tighten over any pipe on the drive control tiller
- Charging
- None; the holder has no cable or charging connection
- Included
- Holder and two screw mounts; the phone is not included
- Grip
- Spring-loaded, holds most large cell phone sizes
- Compatibility
- Control tiller of Golden Buzzaround and LiteRider scooters
- Other holders
- GB121 and GB124 use MBA-0005; GR595 uses MBA-0002
- Product type
- Phone holder
- Part number
- MBA-CPH
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
