Skip to Content Skip to main content Skip to content
Showroom hours

ADP registered vendor. Help with ODSP, March of Dimes, WSIB, VA and IFHP. ADP registered vendor. See if you qualify

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Invacare

Invacare Solace 1080 Mattress SPS1080, 36 x 80 x 6 in

The Invacare Solace Prevention 1080 (SPS1080) is a foam mattress replacement for a standard 80 in hospital bed deck, rated 350 lbs (159 kg).

  • Size: 36 x 80 x 6 in (91 x 203 x 15 cm)
  • Weight capacity: 350 lbs (159 kg)
  • Construction: one foam layer, convoluted fortress cut, three zones, softer head and heel
  • Cover: 70 denier nylon surface over 11 oz tri-laminate vinyl, fluid resistant
  • Warranty: foam 5 years, cover 1 year
Weight capacity
350 lbs159 kg
Mattress width
36"91 cm
Warranty
Foam 5 years. Cover 1 year. Original purchaser; labour and shipping excluded.
Quote only

Priced by quote: your written quote confirms current pricing, options and availability.

What is included?

The SPS1080 mattress with its cover. The bed, rails and bedding are sold separately; tell us your deck size before you order.

  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
SPS1080
Brand
Invacare
Barcode SPS1080 SPS1080

Description

The Invacare Solace Prevention 1080, part SPS1080, is a foam mattress replacement for a standard 80 in hospital bed deck, rated 350 lbs (159 kg).

What does it do and how does it work?

A single foam layer with a convoluted fortress cut spreads weight across three zones.

  • The head and heel sections are softer, for the two areas that take the most pressure.
  • Invacare states the surface is designed to help minimize the risk of pressure injuries by distributing the weight as uniformly as possible.
  • The sleeping surface is 70 denier nylon. The underside is a fluid-resistant 11 oz tri-laminate vinyl.
  • No pump or power is needed. The mattress works as soon as it is on the deck.

Who is it for, and who should choose something else?

It suits a standard 80 in deck where a foam surface is enough.

  • A nurse, doctor or therapist decides which surface suits the person's skin and risk.
  • For alternating air, see the PressureGuard APM.

Will it fit?

It is 36 x 80 x 6 in (91 x 203 x 15 cm), so it fits an 80 in deck and nothing longer or shorter.

  • A shorter deck leaves an overhang, and an 84 in deck needs a longer mattress.
  • The mattress must fit the frame and rails snugly. Health Canada recommends gaps under 120 mm (4.75 in) in zones 1 to 3 and under 60 mm (2.375 in) in zone 4. See bed rails.
  • We confirm your deck length, width and rail gap before you order.

Using it day to day

Wipe the top and bottom covers after each use.

  • Remove the bedding, wipe both covers with an organic cleaner or soapy water, then use a quaternary, phenolic or 8 to 10% bleach solution.
  • Do not open the zippered top cover, autoclave it, or use iodine cleaners, which stain the fabric.
  • Inspect the mattress inside and out every 3 months, and remove it from service if a part is damaged.
  • Check compression with a straight edge. Past 25%, replace the mattress.

What does it work with, and what are its limits?

Use the lower of 350 lbs (159 kg) and the bed's own limit.

  • It replaces the mattress; it is not an overlay.
  • The foam is warranted 5 years and the cover 1 year, to the original purchaser, if the cleaning and 3 month inspection are kept. Labour and shipping are not included.
  • Once it has touched skin it cannot come back. See our return policy.

How does it compare?

Frequently asked questions

Is the cover replaceable?

Yes. Invacare lists covers 1163135 and 1163155 in 36 x 80 x 6 in for SPS1080.

How do I know when the foam has worn out?

Lay a straight edge over the compressed area and measure its depth against the full 6 in. Past 25%, replace the mattress.

Can the cover go in a washing machine?

No. Wipe it in place and let it dry fully. Do not open the zippered top cover or autoclave it.

Funding may help: see who may help pay.

Specifications

Weight capacity
350 lbs (159 kg)
Construction
Single foam layer, convoluted fortress cut, three zones, softer head and heel
Cover
70 denier nylon top, 11 oz tri-laminate vinyl bottom, fluid resistant
Cover care
Wipe with an organic cleaner or soapy water, then a quaternary, phenolic or 8 to 10% bleach solution. Do not open the zippered cover or autoclave it.
Mattress width
36" (91 cm)
Mattress length
80" (203 cm)
Mattress height
6" (15 cm)
Warranty
Foam 5 years. Cover 1 year. Original purchaser; labour and shipping excluded.
Product type
Foam Mattress

Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Mobility store warranty terms

These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.

1 year on parts.

Read the warranty and service policy for the full terms.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.

Not sure where to start?

Talk to a specialist. No pressure, no obligation.

Book a free visit