Description
The Blake Salute RDX is a powered air mattress with 3-to-1 alternation and micro low air loss. The standard size is 36 x 80 x 8 in (91 x 203 x 20 cm), code SALUTERDX.
Who is it for?
- Blake states it is used for maintenance of skin health and the prevention and treatment of stage I to IV pressure injuries.
- A nurse, doctor or therapist should choose the surface and its settings based on assessment.
- The 500 lbs (227 kg) rating applies to the mattress; the bed frame's safe working load also applies.
- It is not the surface for heavy perspiration.
- Warranty terms are in the Warranty tab.
How does the 3-to-1 alternation work?
- Eighteen 8 in cells: a 4.5 in therapy layer over a 3.5 in static air layer.
- For every three cells, one deflates, so two-thirds of the body stays supported at any time.
- Static mode holds the cells steady for care; Max Inflate firms the surface for transfers and dressing changes.
- Happy Heel is a separate digital setting for the heel section.
- A mesh centre strip keeps the cells together.
What can you set?
- Eight comfort settings, in both alternation and static modes.
- The cycle runs at 5, 10, 15 or 20 minutes.
- The keypad locks to stop changes. Low pressure and power failure each raise a visual and audible alarm, and the alarm can be muted.
What happens in a power cut or CPR?
- Powered therapy stops. The 3.5 in static air layer still supports the person, and the mattress has no foam base.
- For CPR, open the CPR valve; Blake gives a quick deflation within 20 seconds.
Will it fit and how is it cleaned?
- Measure the deck and the gap at any bed rails. The 8 in (20 cm) height changes transfer height; Health Canada advises gaps under 120 mm (4 3/4 in) in zones 1 to 3 and 60 mm (2 3/8 in) in zone 4.
- Cells snap out of the base for cleaning or repair.
- Covers can be machine washed at up to 70 °C; never use phenol-based cleaners.
- Wipe the pump with mild detergent and check the air filter every six months.
- A home assessment can check the setup.
How does it compare?
The Rhythm Multi adds pulsate and lateral rotation. See low air loss mattresses for the powered range.
Frequently asked questions
Is this a mattress or an overlay?
A full mattress replacement, 8 in high. It replaces the mattress on the deck rather than sitting on top of one.
Does the pump come with it?
Blake supplies the Salute RDX as a mattress system. We confirm the pump, hoses and cover in your written quote.
Does therapy continue in a power cut?
No powered mode runs without electricity. The 3.5 in static air layer keeps supporting the person.
Funding may help: see who may help pay. A used mattress cannot be returned under our return policy.
Specifications
- Weight capacity
- 500 lbs (227 kg)
- Product weight
- 25.3 lbs (11.5 kg)
- Construction
- 18 cells: 4.5" therapy over 3.5" static air; no foam base
- Cover
- Quilted nylon, vapour permeable
- Cover care
- Machine wash covers to 70 °C; no phenol cleaners; filter check every six months
- Therapy modes
- 3-to-1 alternation, static, Max Inflate
- Cycle time
- 5, 10, 15 or 20 minutes
- Comfort settings
- 8, in alternation and static modes
- Alarms
- Low pressure and power failure, visual and audible, with mute
- CPR release
- Quick CPR valve; deflation within 20 seconds
- Power failure protection
- 3.5" static air layer supports the person; powered therapy stops
- Power supply
- 110-120 V AC, 60 Hz, 0.2 A
- Controller
- Included only in the full-system package
- Mattress width
- 36" (91 cm)
- Mattress length
- 80" (203 cm)
- Mattress height
- 8" (20 cm)
- Size
- 36 x 80 x 8 inches
- Therapy
- Three-to-one alternation, static setting and micro low air loss
- Warranty
- 12 months from delivery, defects in material and workmanship
- Product type
- Powered low air loss and alternating pressure mattress
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Documents
- Brochure Salute RDX Low Air Loss Mattress for Pressure Ulcer Prevention brochure
- Brochure Blake Salute RDX brochure
- Brochure Blake Medical mattress catalog (April 2025)
- User Manual Salute RDX Low Air Loss Mattress for Pressure Ulcer Prevention user manual
- User Manual Salute RDX user manual
- User Manual Salute RDX Low Air Loss Mattress for Pressure Ulcer Prevention quick reference guide
- All forms and documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Prius Healthcare, the maker of the Salute RDX system that Blake Medical supplies in Canada, warrants it against defects in material and workmanship for 12 months from the date of delivery.
- Mattress and control unit: 12 months; repaired or replaced at the maker's choice at no charge.
- Equipment goes to the maker's service address for repair, with shipping prepaid.
- The warranty is not transferable.
- Excludes damage from shipping, tampering, improper maintenance, carelessness, accident, negligence or misuse, and equipment altered, repaired or taken apart without the maker's written authorization.
Compare similar products
Other models worth a look before you decide.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
