Description
The Drive 6298 is the medium adjustable furniture riser, raising a bed or furniture leg by 2 to 3 in (5.08 to 7.62 cm).
What does it do and how does it work?
- Raises a bed or furniture leg for easier transfers.
- Two wood inserts set a 2 to 3 in (5.08 to 7.62 cm) lift.
- Reverse the block or add and remove inserts to change the height.
- Multi-laminated plywood; 7 in (17.8 cm) block height and 4 in (10 cm) inside diameter.
- Rated to 500 lb (227 kg), with one block required per leg.
Who is it for, and who should choose something else?
- For legs that fit the 4 in cut-out and need a small lift.
- For a larger lift choose the 6299, 3 to 6 in with three inserts.
- Not for a castered bed unless the caster seats in the cut-out.
Will it fit?
- The leg must fit inside the 4 in (10 cm) opening.
- One block goes under each leg; count the legs.
- Use the same height under every leg.
Using it day to day
- Set the inserts, then place one block under each leg.
- Check that the bed or furniture is stable after lifting.
- Keep the load within 500 lb (227 kg).
What does it work with, and what are its limits?
- A riser block, not a caster or a frame part.
- No caster mounting method is published; check the fit first.
- Ask us for the package quantity and warranty.
- Other add-ons are under bed accessories.
How does it compare?
- Drive 15005LP low bed: changes height on the frame, not with a block.
- Delta hi-low bed: a frame with its own height adjustment.
- Homecare beds: frames with their own height mechanisms.
Frequently asked questions
How many blocks come in one order?
We confirm the package; you need one block per leg.
Will a leg wider than 4 in fit?
No. The opening is 4 in (10 cm); measure every leg.
Can it go under a bed on casters?
Only if the caster seats in the cut-out; check before you buy.
Funding may help: see who may help pay.
Specifications
- Weight capacity
- 500 lbs (227 kg)
- Product weight
- Block height 7 in (17.8 cm)
- Height range
- 2 to 3 in (5.08 to 7.62 cm) with two inserts
- Size options
- Medium 6298, 2 to 3 in; large 6299, 3 to 6 in
- Sold as
- One riser block with two inserts; package quantity confirmed
- Material
- Multi-laminated plywood
- Mounting
- One block under each leg; 4 in (10 cm) inside diameter cut-out
- Compatible with
- Furniture legs fitting a 4 in (10 cm) cut-out; no hospital bed model specified
- Product type
- Adjustable furniture riser
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
