Skip to Content Skip to main content Skip to content
Showroom hours

ADP registered vendor. Help with ODSP, March of Dimes, WSIB, VA and IFHP. ADP registered vendor. See if you qualify

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Drive Medical

Toilet Safety Rail by Drive Medical, RTL12087

The Drive Medical Toilet Safety Rail (RTL12087) gives a padded handle on each side of the toilet. The bracket fastens under the seat with the seat's own screws. Handles adjust from 16.5" to 19.5" (41.9-49.5 cm), and the rail is rated 300 lb (136 kg).

Weight capacity
300 lb136 kg
Width between handles
16.5" to 19.5"41.9-49.5 cm
Mounting
Bracket under the seat, using the seat screws
Handles
Soft and padded
Product weight
10.5 lb4.8 kg
Assembly
Brass push pins for the width
$ 60.00 $ 60.00

What is included?

One RTL12087 rail with two padded handles, frame supports, and the seat bracket. Reuse the toilet's own seat screws. No new bolts are in the box.

Offers and rewards Applied in your cart at checkout.
  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
RTL12087
Brand
Drive Medical
Barcode RTL12087 RTL12087

Description

The Drive Medical RTL12087 is a toilet safety rail with soft padded handles, for someone who wants a hand on each side while sitting down and standing up.

What does it do and how does it work?

A bracket sits on the bowl under the seat, and the seat goes back on over it.

  • Take the seat off and keep its screws. Those screws hold the bracket and the seat.
  • Brass push pins set the handles from 16.5" to 19.5" (41.9-49.5 cm).
  • The front of each handle lines up with the leg that has the rubber tip. Those tips sit under the seat, and the person's weight helps hold the rail.
  • The rail weighs 10.5 lb (4.8 kg) and is rated 300 lb (136 kg).

Who is it for, and who should choose something else?

  • Someone who can have the toilet seat lifted once, and wants padded handles beside the bowl.
  • If the seat should stay on, the RTL12079 stands on the floor and does not use the seat screws.
  • If the arms must change height, the RTL12000 adjusts in 1" steps and spans 19" to 23.50" (48.3-59.7 cm), still at 300 lb (136 kg).
  • A wall handhold belongs on a grab bar.

Will it fit?

  • The handles adjust from 16.5" to 19.5" (41.9-49.5 cm) between them.
  • The bracket has to sit on the bowl, with the seat and lid able to close over it.
  • Measure the space beside the bowl, or book a free home assessment.

Using it day to day

  • Set each push pin all the way through its hole before anyone uses the rail.
  • Check the seat screws from time to time and tighten any that have loosened.
  • Bathroom safety items cannot be returned once they are used. See the return policy.

What does it work with, and what are its limits?

  • Use it to sit and to stand. It is not meant to hold your entire weight.
  • The weight limit is 300 lb (136 kg).
  • It is not a raised seat and not a wall bar. It does not bolt to the floor.
  • Limited lifetime warranty for the original purchaser; see the Warranty tab. Claims go through our warranty service.

How does it compare?

  • The AquaSense 770-665 adjusts from 28" to 32" (71-81 cm) and is rated 250 lb (113 kg), with plastic arms.
  • The RTL12079 stays on the floor when the seat cannot come off.
  • Other frames are on the toilet safety frame page.

Frequently asked questions

Does the lifetime warranty cover the handle grips?

No. Grips, rubber pieces, and casters wear in normal use, and the limited lifetime warranty leaves those parts out.

How does each handle lock on?

After the push pin is through the hole, put the E-clip into the back of that handle. Do the same on the other side.

Which way does the bracket face?

Point the tube on the bracket toward the tank, then set the seat and lid back on over the bracket.

Funding may help: see who may help pay.

Specifications

Weight capacity
300 lb (136 kg), bracket under the toilet seat
Product weight
10.5 lb (4.8 kg)
Assembly
Brass push pins, E-clips, and the toilet's own seat screws
Armrests
Soft padded handles
Height adjustment
None
Width between arms
16.5" to 19.5" (41.9-49.5 cm), brass push pin
Uses
Sit and stand; not a full-weight support
Mounting
Toilet seat screws; bracket under the seat, tube toward the tank
Warranty
Limited lifetime for the original purchaser
Product type
Toilet Safety Rail

Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Warranty details

Drive Medical warrants the Toilet Safety Rail (RTL12087) to be free of defects in materials and workmanship for the lifetime of the original consumer purchaser.

  • Term: limited lifetime.
  • Covers the original consumer purchaser only.
  • Excludes failure from owner misuse or negligence, and normal wear and tear.
  • Excludes non-durable parts that wear and need periodic replacement, such as rubber accessories, casters and grips.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.

Not sure where to start?

Talk to a specialist. No pressure, no obligation.

Book a free visit