Skip to Content Skip to main content Skip to content
Showroom hours

ADP registered vendor. Help with ODSP, March of Dimes, WSIB, VA and IFHP. ADP registered vendor. See if you qualify

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Handicare

Savaria ReTurn7500i transfer platform, article 7500i

The ReTurn7500i, article 7500i, is a manual sit-to-stand platform with a standard-height ladder. The ladder has an opening so a separate ReTurnBelt can be hooked on once the person is standing.

Product type
Manual sit-to-stand platform
Safe working load
330 lb150 kg
Ladder
Standard height, with a belt opening
Base plate
26.97 x 22.44 in685 x 570 mm
Product weight
36.38 lb16.5 kg
Power
None. Foot brakes only
$ 1,459.91 $ 1,459.91

What is included?

The platform, its standard-height ladder and padded lower-leg supports. The ReTurnBelt, HeelStrap, SupportStraps, carry bag and the alternative ladders are sold separately.

Offers and rewards Applied in your cart at checkout.
  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
7500i
Brand
Handicare
Barcode 7500i 7500i

Complete your equipment setup

Description

Article 7500i is the ReTurn7500i platform: a manual stand aid with a standard-height ladder, not a belt.

Who can use the ReTurn7500i?

  • An adult who can bear weight while standing, keep balance with support, grasp the handles and follow instructions.
  • Short moves on a flat floor: bed, wheelchair, chair or toilet.
  • Not a powered lift, and not a floor pickup. Someone who cannot stand needs a different aid.

Will it fit the room?

  • Base plate 26.97 in long by 22.44 in wide (685 x 570 mm). Overall height 45.28 in (1150 mm).
  • Base plate height is 1.57 in (40 mm). The platform weighs 36.38 lb (16.5 kg).
  • Four corner castors are 1.38 in (35 mm). Two centre wheels are 4.92 in (125 mm).
  • It splits into chassis and ladder for a car or cupboard.
  • Measure the doorway and the turn into the bathroom before you order; a free home assessment helps.

How does a transfer work?

  • Set the lower-leg supports about two fingers below the kneecaps; they adjust sideways and in angle.
  • Feet go on the marked spots, inside the wheels. Brakes show red when locked and green when free.
  • The person leans in, holds the ladder and stands. The carer gives counter-pressure. Do not push on the person.
  • The ladder opening is for a ReTurnBelt after the person is standing. The belt is a separate order.
  • A ReTurnBelt hooks through this ladder opening. The belt is a separate order and is not a patient-lift sling.

Which other pieces are separate?

  • Lower-leg supports on the 7500i come with extra padding. Replacement pads are article 7215.
  • The standard ladder is 7501i; 7501 and 7401 are alternatives. Check the serial before you swap one.
  • HeelStrap, SupportStraps and the carry bag are accessories, not part of article 7500i.
  • Compare powered stand lifts on sit-to-stand lifts, or the wider patient lift range. Belts sit with slings and belts.

Frequently asked questions

Is article 7500i the belt with an opening?

No. 7500i is the whole platform, and the opening is in the ladder so a separate ReTurnBelt can hook on.

Does every transfer need the belt?

No. The ladder can be used on its own, and the belt is added when more support is needed.

Can I put the low ladder on this base?

Ladder 7401 is listed as an alternative part for this model. We check the serial before you swap one.

Can it cross a doorsill?

The instructions limit it to a flat floor and to short moves. A raised sill is a reason to look at the path first.

Funding help for a patient lift in Ontario

Funding may help: see who may help pay.

Specifications

Weight capacity
330 lb (150 kg)
Product weight
36.38 lb (16.5 kg)
Caster size
4 corner castors 1.38 in (35 mm); 2 centre wheels 4.92 in (125 mm)
Overall width
22.44 in (570 mm)
Overall height
45.28 in (1150 mm)
Overall length
26.97 in (685 mm), base plate
Folding
Splits into chassis and rising ladder
Controls
Foot brakes. No battery
Care and washing
Wipe with warm water or soap. Disinfect with 70% ethanol or 45% isopropanol if needed
Base height
1.57 in (40 mm)
Compatible with
ReTurnBelt, hooked through the ladder opening. Belt sold separately
Product type
Manual sit to stand aid

Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Mobility store warranty terms

These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.

1 year on parts.

Read the warranty and service policy for the full terms.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.

Not sure where to start?

Talk to a specialist. No pressure, no obligation.

Book a free visit