Description
SystemRoMedic article 7215 is a spare pair of lower-leg pads for ReTurn transfer platforms and TurnSafe standing aids, for a person whose shins press hard during a sit-to-stand.
What does it do and how does it work?
The pair covers both lower-leg supports, so the shins meet padding instead of the bare plate.
- Sold only as one pair, article 7215, one pad for each support.
- A ReTurn7500i leaves the factory with this extra padding already fitted.
- The plate underneath still adjusts up, down and from side to side.
Who is it for, and who should choose something else?
- Choose 7215 when the pads on a ReTurn7500, ReTurn7500i, ReTurn7400, TurnSafe or TurnSafe2 are worn or too firm.
- Choose article 7216 for a ReTurn7600, rated 205 kg (450 lbs).
- Choose the leg support, article 7323, when the plate itself needs replacing.
Will it fit?
- ReTurn7500, ReTurn7500i, ReTurn7400, TurnSafe and TurnSafe2. Also listed for a ReTurn7100 still in use.
- The ReTurn7400 and ReTurn7500 share a base plate, so the same pair fits either ladder.
- Set each support so the top of the plate sits about 3 cm (two fingers) below the kneecaps.
We confirm the model number on the frame before you order.
Using it day to day
- Wipe with warm water or a soap solution; disinfect with 70% ethanol or 45% isopropanol when needed.
- Replace the pair if a pad is torn, faded or worn through.
What does it work with, and what are its limits?
- The pads have no load rating of their own. The host platforms are rated 150 kg (330 lbs).
- Feet that slide back need the ReTurn heel strap, item 7250.
How does it compare?
- Article 7216 is the pair for the ReTurn7600 supports.
- See sit-to-stand lifts if the person cannot bear weight while standing.
Frequently asked questions
Can I buy a single pad?
No. Article 7215 is one pair, so both supports are covered together.
Will these pads fit a powered floor lift?
No. They fit only the ReTurn and TurnSafe models named above.
I still have a ReTurn7100. Is 7215 the right pair?
Yes. Article 7215 is listed for a ReTurn7100 as well as the later 7400 and 7500 models.
Funding may help: see who may help pay.
Specifications
- Care and washing
- Wipe with warm water or a soap solution. Disinfect with 70% ethanol or 45% isopropanol when needed.
- Quantity
- 1 pair
- Compatible with
- ReTurn7100, ReTurn7500, ReTurn7500i, ReTurn7400, TurnSafe and TurnSafe2
- Use
- Extra padding on the lower-leg supports for pain-sensitive users
- Model number
- 7215
- Standard equipment
- Factory fitted on the ReTurn7500i
- Not for
- ReTurn7600, which takes article 7216
- Spare set
- Article 7315 is two pads of article 7215 for the ReTurn7500i, 7500 and 7400
- Product type
- Replacement lower-leg support padding, sold as one pair
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Fits these products
1 product
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







