AquaSense 3-in-1 Raised Toilet Seat, 4 Inch, Contoured - 770-618

The AquaSense 770-618 is a contoured raised toilet seat that adds 4 in (10 cm) to the height of a standard or elongated toilet, with a handle you can fit on one side, on both sides, or leave off.

What does it do and how does it work?

• Rise: adds 4 in (10 cm); the 770-617 in the same family adds 2 in (5 cm).
• Three handle setups: no handles for space, one handle for a handhold on the side you choose, or both for support getting up and down.
• Handles: foam-padded aluminum tubes, and their position adjusts to suit the person and the stage of recovery.
• Mounting: a clamp assembly with a plastic screw, clamp and C-clip holds the seat to the bowl.
• Shape: body-contoured polyethylene with a front perineal scoop and a wider opening; corrosion resistant and easy to clean.

Who is it for, and who should choose something else?

It suits someone who needs the toilet seat 4 in (10 cm) higher and wants a handhold on the seat itself, including after surgery or while recovery changes.

Choose the 770-617 if 2 in (5 cm) is enough, a lidded seat if a lid matters, or a toilet safety frame if the person needs arms beside the toilet.

Will it fit?

• Bowl: Drive says it attaches to most standard and elongated toilets. Measure the bowl at the rim before ordering.
• Height: measure floor to the top of the toilet seat, add 4 in (10 cm), and check the person's feet still reach the floor.
• Mounting room: keep the rim under the bowl clear for the clamp.
• Space: with both handles fitted, the seat needs clear space on both sides.

Using it day to day

• Fit the handle or handles with the four screws and washers, or leave them off for more space.
• Set the armrest position, then tighten the clamp screw so the seat sits firm on the bowl.
• Check the seat is secure before sitting down.
• Wipe the seat and handles with a mild cleaner.

What does it work with, and what are its limits?

• Capacity 300 lbs (136 kg), for sitting, not standing on the seat.
• The rise is fixed: the seat does not adjust up or down.
• It has no lid of its own.
• It fits standard and elongated bowls.

How does it compare?

• 770-617: the same contoured seat and handle setups, adding 2 in (5 cm) instead of 4 in (10 cm).
• Drive 12065: 4 in (10 cm) and 400 lbs (181 kg), with a lid, for standard bowls, without handles.
• PreserveTech RTL12C005-WH: 4 in (10 cm) and 400 lbs (181 kg), with a bidet and lid, without handles.

Funding may help: see who may help pay.

The seat carries a 5 year limited warranty; see the Warranty tab.