Description
The Maple Leaf tilt commode is built to the order form, attendant propelled, stainless steel. The stock chair is 250 lbs (113 kg), an 18 in seat, and tilt up to 30 degrees. Heavier ratings and other sizes are ordered.
Stock chair, or a different build
- Seat 18 in by 18 in (46 by 46 cm) unless you order another size. Soft seat puts the top at 24 in (61 cm). The rail is 21 in (53 cm).
- A Drive tilt with a higher rating and less configuration: the NRS18010 is 300 lbs.
- A stainless tilt to 40 degrees: the RAZ AT.
- If a chair cannot do the transfer: patient lifts.
Casters and the opening
- Four 5 in (13 cm) casters: three total-lock, one directional lock. Overall width 22 in (56 cm) on the 18 in seat with casters. 26 in (66 cm) if you order 24 in rear wheels.
- Flip-back arms. Tension-adjustable mesh back, 20 in (51 cm) from the rail, moulded headrest. Removable swing-away footrests.
- Chair about 32 lbs (14.5 kg) with arms, footrests and casters. A keyhole or oval opening is ordered. The bucket is a removable plastic pail. It does not fold.
- We confirm the sitting height on your build.
Warranty is 5 years on the frame and 2 years on parts, original purchaser. Tilt commodes. Return policy. Free home assessment before the order form is signed.
Frequently asked questions
Is 250 pounds the maximum Maple Leaf will build?
No. That is the stock chair. Heavier ratings are ordered. We confirm the rating on the form.
Which caster does not total-lock?
Three total-lock. The fourth locks direction only. Lock the chair before a tilt and before a transfer.
Can I pick the seat opening later?
The opening is part of the order. A padded seat with a keyhole or an oval is specified then, not after it is built.
Funding may help: see who may help pay.
Specifications
- Weight capacity
- 250 lbs (113 kg) on the stock chair; heavier ratings are ordered
- Product weight
- 32 lbs (14.5 kg) with armrests, footrests and casters
- Assembly
- Built to the order form; not a knockdown frame
- Seat width
- 18" (46 cm) stock; other widths are ordered
- Seat depth
- 18" (46 cm) stock; other depths are ordered
- Armrests
- Flip-back armrests
- Tilt range
- Up to 30 degrees
- Backrest
- Tension-adjustable mesh, 20" (51 cm) from the rail, moulded headrest
- Footrests
- Removable swing-away footrests with plastic footplates
- Seat height
- 21" (53 cm) to the rail; 24" (61 cm) to the floor with the soft seat
- Height adjustment
- Set when the chair is built; stock is 21" to the rail
- Caster size
- 5" (13 cm), four casters: three total lock, one directional lock
- Overall width
- 22" (56 cm) with casters on the 18" seat; 26" (66 cm) with 24" rear wheels
- Seat opening
- Padded seat; a keyhole or oval opening is ordered
- Commode pail
- Removable plastic bucket
- Brakes
- Three total-lock casters; the fourth locks direction only
- Folding
- Does not fold
- Uses
- Shower commode, attendant propelled
- Material
- Stainless steel frame
- Warranty
- 5 years on the frame and 2 years on parts, for the original purchaser
- Product type
- Tilt Shower Commode
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
