Skip to Content Skip to content
Showroom hours

ADP registered vendor. Help with ODSP, March of Dimes, WSIB, VA and IFHP. ADP registered vendor. See if you qualify

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

PCP

PCP Rustproof Adjustable Bath Step

The PCP 7100 is a rustproof step that takes the height out of getting into the bath. It adjusts from 9 to 11 inches in one-inch steps, carries 300 lb (136 kg), and has a padded non-slip top with rubber suction feet that grip a wet floor.

  • Maker: PCP, made by Surgical Appliance Industries; item 7100, barcode 048503710002
  • Product type: Adjustable bath safety step
  • Step height: 9 to 11 inches, adjusted in 1-inch increments
  • Step size: 14 inches wide by 11 inches deep, on an 18 inch by 14 inch base
  • Weight capacity: 300 lb (136 kg)
  • Top and feet: Molded step with a non-slip padded finish; non-marring rubber suction tips
  • Assembly: Some assembly needed; five screws with washers and four push-in legs come in the box
Weight capacity
300 lb136 kg
Warranty
Limited lifetime warranty from PCP

What is included?

The step, the two frame pieces, four legs and the five screws with washers, plus the maker's assembly instruction sheet. A bath bench, a transfer bench and grab bars are separate products. Bathroom safety items are non-returnable under our return policy, so measure the height and the floor space before you order.

$ 72.71 $ 72.71

Offers and rewards Applied in your cart at checkout.
  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
7100
Brand
PCP
Category
Bath Steps
Barcode 7100 7100

Description

The bathroom floor sits lower than the tub, and that gap is what makes stepping in hard. The PCP 7100 is a rustproof step that shortens the lift, and it adjusts through three settings.

Set it at 9, 10 or 11 inches, so the step lands where the stride wants it. The padded top measures 14 inches by 11 inches and the base spreads to 18 inches by 14 inches.

Staying put in a wet bathroom

The top is a molded pad with a non-slip finish, which is comfortable on bare feet. The four feet are rubber suction tips that grip a tiled floor without marking it, and PCP rates the step to 300 lb (136 kg). Nothing on the frame rusts, so a wet floor is no problem.

Putting it together

It arrives in pieces and needs some assembly. The maker's instruction sheet has the frame screwing to the underside of the step with the five screws and washers supplied, and the four legs pushing into the frame ends.

How does it compare?

  • Bath steps: the rest of the range, fixed and adjustable.
  • Bath benches: for a person who would rather sit to wash than stand.
  • Grab bars: something to hold on to while stepping in and out.

Frequently asked questions

How tall is it, and which setting do I need?

It adjusts from 9 to 11 inches, in one-inch steps. Sit on the edge of the bath and see where your foot lands comfortably; that gap is the setting to aim for.

Will it hold my weight?

PCP rates it to 300 lb (136 kg). The base is 18 inches by 14 inches, so it is wider at the floor than the step is at the top.

Can it stay in the bathroom all the time?

Yes. The maker describes it as completely rustproof, and the feet are rubber, so splashes are fine.

Does it need assembling?

Some assembly is needed: the frame screws to the step with the five screws and washers in the box, and the legs push into the frame ends.

Will it fit beside my tub?

Allow for a base of 18 inches by 14 inches, plus a little room to stand on it. If the space is tight, send us the measurements and we will say what else might fit.

We deliver across Toronto and the GTA. Bathroom safety items are non-returnable under our return policy, so check the height and the space first; delivery is in our shipping policy. Ask us anything through contact us, or book a free home assessment.

Funding may help: see who may help pay.

Specifications

Weight capacity
300 lb (136 kg)
Assembly
Some assembly: two frame pieces, four legs, and five screws with washers
Base size
18 inches by 14 inches at the floor, wider than the step on top
Frame
Completely rustproof, so it can stay in a wet bathroom
Step height
Adjustable from 9 to 11 inches, in 1-inch increments (three settings)
Item number
7100 (PCP), barcode 048503710002
Feet
Non-marring, non-slip rubber suction tips, self-levelling
Weight
About 3.9 lb (1.8 kg)
Step size
14 inches wide by 11 inches deep
Step top
Molded step with a non-slip padded finish
Maker
PCP, a brand of Surgical Appliance Industries, with its Canadian office in Ottawa, Ontario
Warranty
Limited lifetime warranty from PCP
Product type
Adjustable bath safety step, for getting into and out of the bath

Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.

Not sure where to start?

Talk to a specialist. No pressure, no obligation.

Book a free visit