Description
The SystemRoMedic EasyBelt, hug goes around the person's waist, and the carer holds its handles to support a sit-to-stand move, a sitting transfer or a walk. Its sliding handles run in loops, so the belt grips rather than riding up the body.
Who is it for, and who should choose something else?
- A person who can bear some weight and needs help to stand up, sit down or walk.
- A carer who needs a firm hold at the waist for a short, supported move.
- Not for lifting. The maker says it is not a lifting device; for a full lift, choose a patient lift and a sling.
- For seated positioning rather than transfers, see our positioning support belts.
How do I check the fit?
Size the belt by the person's waist, not their weight.
- XS: waist 17.7 to 27.6 in (45 to 70 cm)
- S: waist 23.6 to 39.4 in (60 to 100 cm)
- M: waist 27.6 to 47.2 in (70 to 120 cm)
- L: waist 39.4 to 63.0 in (100 to 160 cm)
- XL: waist 45.3 to 68.9 in (115 to 175 cm)
The ranges overlap, so ask us before you order if the waist falls between two sizes.
How does it work, and what are its limits?
- Each size has a set of fixed handles plus a smaller set of sliding handles, from 3 + 2 (XS) to 7 + 6 (XL).
- The safe working load is 375 lb (170 kg). The maker gives this figure for the whole EasyBelt and FlexiBelt range, for support only.
- A quick-connect buckle closes the belt.
- Do not use it to lift a person or hold them up.
How do I care for it?
Read the label before the first wash. Wash with no fabric softener and avoid tumble drying. The inner lining is wipeable, and the maker expects up to 10 years of normal use.
How does it compare?
- Classic EasyBelt, medium (6014) is a different belt with its own codes and fixed handles. Choose the hug when the sliding handles suit the transfer.
- FlexiBelt hug has the same belt shape and load figure, with a soft polyester velvet inside instead of a wipeable nylon lining.
Can funding help pay for it?
Funding may help: see who may help pay.
Frequently asked questions
Does it need the SupportStraps for a leg harness?
No. The belt works alone. The maker also lists SupportStraps (item 6061) as an optional leg harness to use with it.
What do the sliding handles do?
They run in loops, so the belt grips the body rather than sliding up. The fixed handles stay in place alongside them.
What is the working life of this belt?
The maker expects up to 10 years of normal use, when it is washed and cared for as the label and manual describe.
Specifications
- Weight capacity
- 375 lb (170 kg) safe working load, for support, not lifting
- Care and washing
- Read the label; no fabric softener; avoid tumble drying
- Material
- Durable nylon outer with reinforced seams; PU-coated nylon inner lining
- Compatible with
- Optional SupportStraps (item 6061) as a leg harness
- Model number
- 6002 to 6006 (XS to XL)
- Closure
- Quick-connect buckle
- Handles
- Fixed and sliding, 3 + 2 (XS) to 7 + 6 (XL)
- Product type
- Transfer and gait support belt
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







