Description
The FlexiBelt classic is a transfer belt for helping someone stand from a seat, or move between seats and surfaces. It sits around the waist or hips, and the helper holds its handles.
How do I choose the right size?
- Measure the waist or hip with a soft tape, over the clothing worn for transfers.
- Compare with the size ranges in the specifications. Where two ranges cover the measurement, check the user manual's fitting guidance before you choose.
- This is the classic belt. The FlexiBelt hug is a separate design with sliding handles.
What does it work with?
- SupportStraps (leg harness), as the maker describes.
- EasySlide or EasyGlide sliding aids, as the maker describes. See the EasyGlide transfer board.
- Do not use the belt above its 170 kg (375 lb) safe working load. Read the user manual before first use.
For a separate support belt, see the EasyBelt medium (6014). Sliding mats are sold separately: the EasySlide polyester mat (2010) and the EasySlide long transfer mat (1020).
Frequently asked questions
How much weight can the FlexiBelt hold?
The maker rates the safe working load at 170 kg (375 lb) for every size. Do not use the belt above that load.
Can one size fit everyone?
No. The four sizes cover waist or hip measurements from 23.6 to 68.9 in (60 to 175 cm). Measure first, then choose.
Which sliding aids can I pair with the belt?
The maker describes use with EasySlide or EasyGlide sliding aids, and with SupportStraps as a leg harness. Sliding mats are sold separately.
How is the classic different from the FlexiBelt hug?
The classic is a separate design from the hug, which has sliding handles. Read the user manual before first use.
Funding may help: see who may help pay.
Specifications
- Material
- Nylon outer, polyester velvet inner
- Size
- S 23.6 to 39.4 in, M 27.6 to 47.2 in, L 39.4 to 63.0 in, XL 45.3 to 68.9 in
- Safe working load
- 170 kg (375 lb), all sizes
- Maker
- Handicare (SystemRoMedic)
- Fits
- Waist or hip, 23.6 to 68.9 in (60 to 175 cm), S to XL
- Closure
- Quick-connect buckle with tightening strap
- Handles
- 7 (S), 9 (M), 11 (L), 13 (XL)
- Product type
- Transfer belt for sit-to-stand and seated transfers
- Part number
- 6023, 6024, 6025, 6026 (S, M, L, XL)
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







