Description
This is a fixed wall grab bar, not a suction or towel bar: the screws through its flanges decide how well it holds.
Who is it for, and who should choose something else?
- A person who wants a firm handhold to steady themselves and stand up at the toilet, shower or tub.
- Not for a wall without solid backing. For a bar that clamps to the tub rim instead, see our tub rails.
Will it fit your wall?
- Find solid backing, such as a stud or added blocking, where the flanges will land. The 3/16 in fasteners need something solid to bite.
- Measure the gap between studs before you choose a length, so both flanges land on backing.
- The bar stands 1.5 in (38 mm) off the wall, so keep that space clear for your hand.
- Not sure where the studs are? Book a free home assessment.
What does it hold, and what are its limits?
- The maker rates the bar at 300 lb (136 kg) when it is fitted as its instructions say.
- That rating depends on the flanges being fixed into solid backing, not drywall alone.
- Ask an occupational therapist to check the wall if you are unsure it will take the load.
How does it compare?
See all our grab bars, or compare the AquaSense knurled grab bar with rotating flange if you need the bar to turn.
Frequently asked questions
Can it go into drywall with no stud behind it?
Not on the strength the maker rates. Find a stud or add solid blocking, because the 300 lb rating assumes the flanges are fixed into solid backing.
Which length should I pick for a tub?
Pick the length that lets both flanges land on solid backing at a height your grip can reach. Measure the wall first, and call us if the studs do not line up.
Can it be mounted at an angle?
Yes. The maker allows vertical, horizontal or angled mounting, so you can set the bar to follow the way the person pulls up from a seat.
Funding may help: see who may help pay.
Specifications
- Weight capacity
- 300 lb (136 kg) when fitted as the maker instructs
- Material
- 304 polished stainless steel
- Mounting
- Vertical, horizontal or angled; 3-hole fixed flange with 3/16 in (4.8 mm) fasteners into solid backing
- Available lengths
- 12, 16, 18, 24 and 32 in (30.5, 40.6, 45.7, 61.0 and 81.3 cm)
- Bar diameter
- 1 in (25 mm); stands 1.5 in (38 mm) off the wall
- Finish
- Knurled grip section; rust and corrosion resistant
- Product type
- Grab Bar
Options and sizes can change some figures. Ask us to confirm yours before you order.
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year from the day the project finishes. Normal wear and tear, accidental damage and changes made by others are not covered.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







