Description
A tub wall is a high, unstable step for someone who weighs 300 lbs or more. This bench puts the seat at the edge of the tub so the person sits first, then swings their legs over.
Who is this bench for, and who should look elsewhere?
- Adults up to 500 lbs (227 kg) who can sit and pivot, alone or with a caregiver.
- Homes with a standard tub and a bath that cannot take a walk-in conversion.
- Choose a standard-rated transfer tub bench if the person is well under the limit, or a shower chair if there is no tub.
How do I check that it fits my tub?
- The footprint is 32.5 in wide and 21.5 in deep (82.6 x 54.6 cm). Check the tub rim is wide enough for both leg pairs to sit on the floor and inside the tub.
- Seat height runs 18 to 24.25 in (45.7 to 61.6 cm). Set it level with the tub wall.
- Leave floor room beside the tub to sit down and turn. A sliding-door track or a shower curtain rod that cannot move may block the seat.
What are the limits of this bench?
- The 500 lb rating is for the whole person, so add clothing and any carried item.
- The feet have suction cups and a non-skid base, but they hold only on a clean, dry, flat floor.
- The seat is textured with drainage holes. Check that the frame is level before each use.
Which version do I get?
- One model, BSBTB. You choose the left or right transfer side when you set it up, and can switch it later.
How does it compare?
- Drive bariatric transfer bench: another bench in the same size class, worth comparing for seat width.
- All transfer benches and bath benches for lower weight ratings.
Funding help
Funding may help: see who may help pay.
Frequently asked questions
Can I change from a left to a right transfer later?
Yes. The bench converts for either side, so it still works if you move or the bathroom layout changes.
Do I need a screwdriver or wrench to put it together?
No. Assembly is tool-free, and the seat height changes with snap buttons in one-inch steps.
Will the person have back support while seated?
Yes. A moulded backrest is built into the seat as a single heavy-duty piece. No arm or commode cut-out is listed for this model.
What if the tub is narrower than the bench?
Measure before ordering. Our free home assessment checks the tub and floor space, and bathroom modifications are an option.
Specifications
- Weight capacity
- 500 lbs (227 kg)
- Product weight
- 28 lbs (12.7 kg)
- Assembly
- Tool-free
- Seat height
- 18 to 24.25 in (45.7 to 61.6 cm), one-inch snap-button steps
- Frame
- Anodized aluminum with added cross braces
- Seat dimensions
- 25 in W x 15.5 in D (63.5 x 39.4 cm)
- Feet
- Wide-based, non-skid, with suction cups
- Overall footprint
- 32.5 in W x 21.5 in D (82.6 x 54.6 cm)
- Seat and back
- Heavy-duty blow-molded, textured, drainage holes
- Transfer side
- Converts for left or right hand transfers
- Warranty
- Limited lifetime on frame, one year on parts
- Product type
- Bariatric tub transfer bench
Options and sizes can change some figures. Ask us to confirm yours before you order.
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







