Description
The RollerSlide flexi moves a person who cannot help with the transfer, with less lifting for the caregivers. It works between two surfaces at different heights.
Who it suits, and who should choose something else
- Caregivers moving a person who cannot shift their own weight or help with the move.
- Transfers between surfaces at different heights, including an ambulance stretcher.
- A person who can stand, walk or help with the move: a sit to stand or sliding aid usually suits them better.
Check the fit before you order
- Gap: the two surfaces must be no more than 7.9 in (20 cm) apart.
- Length: 69 in (175 cm) covers the full body. The shorter trunk-length boards are a different model.
- Load: the safe working load falls as the gap grows, from 441 lb (200 kg) at 3.9 in (10 cm) to 331 lb (150 kg) at 7.9 in (20 cm).
Use and care limits
- Two caregivers work from opposite sides in a walking stance, one pushing and one pulling, as the maker's technique describes.
- Remove the flexi board before an x-ray exposure. The light model (9120) may stay under the user during an x-ray.
- Clean the board with disinfectant. Machine wash the sliding cover, dry on low, and skip fabric softener.
Compare
The RollerSlide light is the same 69 in length at 4.4 lb (2 kg), with a 265-331 lb (120-150 kg) load band. The EasySlide long transfer mat is a different lateral board if this one does not suit your bed. Browse more patient lifts and transfer aids, or contact us and we will help you pick.
Frequently asked questions
Can the flexi board stay under the patient for an x-ray?
No. Remove it before the exposure, as the maker's instructions say. The light model (9120) is the one that may stay under the user.
When should the sliding cover be replaced?
Check it by eye before each use and replace the ULF sliding cover (part 9136) once it is worn. Disposable long covers (part 9138) cut down on laundry.
Does the flexi board need a flat surface?
No. Because it folds lengthwise, it adapts to the surface it rests on, which suits ambulance stretchers and other uneven surfaces.
Funding may help: see who may help pay.
Specifications
- Folding
- Folds in the middle for handling, transport and storage
- Material
- Polyamide (nylon)
- Care
- Board: disinfectant. Cover: machine wash, dry on low, no fabric softener
- Safe working load
- 441 lb (200 kg) at 3.9 in gap; 386 lb (175 kg) at 5.9 in; 331 lb (150 kg) at 7.9 in
- Width
- 20 in (50 cm)
- Length
- 69 in (175 cm)
- Weight
- 8.6 lb (3.9 kg)
- Model
- RollerSlide flexi, art. no. 9148
- Disposable cover
- Long cover, part 9138 (accessory)
- Expected life
- Up to 10 years of normal use
- Gap bridged
- Up to 7.9 in (20 cm); the distance must not exceed 20 cm
- Sliding cover
- ULF, replaceable, part 9136
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







