Description
Span America Q6781 is an out-of-bed alarm cable kit for a bed already in service: a normally closed (NC) cable that connects the bed's exit sensor to the facility's alarm or nurse call system.
What does it do and how does it work?
- It carries the bed-exit signal from the bed to the facility's alarm panel.
- The contact is normally closed, so it suits a panel input that reads NC.
- The kit is the bed-side cable; the alarm panel, the wall wiring and the installation labour are separate.
Who is it for, and who should choose something else?
- It suits a facility adding bed-exit monitoring to an Advantage MC7 or Encore MC9 bed with Linak electronics.
- Match the contact to the alarm panel: Q6779 is the normally open field kit.
- It is not the alarm or nurse call system itself.
Will it fit?
- It fits SPAN Advantage (MC7) and Encore (MC9) beds with Linak electronics.
- It is the field-install kit for a bed already delivered; Q6782 is the factory version.
- The kit weighs 1.0 lb (0.45 kg).
- Send the bed model, the frame part number and the input your alarm reads; we check the kit before you order.
Using it day to day
- A technician fits the cable to the bed and connects it to the alarm input.
- Test the alarm after fitting, before the bed is used for monitoring.
What does it work with, and what are its limits?
- It connects the bed exit sensor to the alarm system; it does not add an alarm panel.
- It is covered for 1 year.
- The bed, the mattress and the room's alarm equipment are separate.
How does it compare?
- The Q6779 kit is the normally open field version.
- The Q6782 kit is the normally closed factory version.
- See patient alarms for the room equipment.
Frequently asked questions
Which contact type do I need?
Match the input on your alarm panel. Q6781 is normally closed; Q6779 is the normally open field kit.
Is the alarm panel included?
No. The kit is the bed-side cable; the panel and the wall wiring are separate.
Can it be fitted to a bed already in use?
Yes. Q6781 is the field-install kit; Q6782 is the factory version.
Warranty: 1 year as a bed accessory; see the warranty terms.
Funding may help: see who may help pay.
Specifications
- Product weight
- 1.0 lb (0.45 kg)
- Package contents
- One out-of-bed alarm cable kit
- Sold as
- One kit, Q6781
- Mounting
- Field installed on the bed
- Compatible with
- SPAN Advantage MC7 and Encore MC9 beds with Linak electronics
- Not included
- Alarm panel, wall wiring and installation labour
- Function
- Connects the bed exit sensor to the facility alarm or nurse call
- Warranty
- 1 year
- Product type
- Out-of-bed alarm cable kit, normally closed
Options and sizes can change some figures. Ask us to confirm yours before you order.
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Span Medical Products Canada warrants the beds and accessories it sells, including this Q6781 out-of-bed alarm cable kit, against defects in workmanship and materials under normal use, from the date of first delivery.
- Cable kit: 1 year.
- Covers the original purchaser only. Labour is not covered; return shipping is covered in the first year.
- Excludes abuse, misuse, poor maintenance, excessive loads, and repairs or modifications not approved by Span.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







