Rexx Q-Series Low Bed, a Span-America Long-Term Care Bed
The Rexx is the low-bed member of the Span-America Q-Series. Its deck starts 7-7/8 in off the floor, close to seat height rather than bed height, and rises to 26 in. Staff work from an upright position instead of a bent one, and the decks are welded grids with a smooth surface that wipes clean.
This model has been discontinued.
- Product type
- Low long-term care bed in the Span-America Q-Series
- Deck width
- 35 in, widened to 42 in with the maker's tool-less expander kit
- Sleep surface
- 80 in deck as QD2000, or 76 in deck as QD2000Y
- Height
- 7-7/8 in to 26 in from the floor to the mattress support
- Working load
- 450 lb (204 kg); the bed weighs 170 lb (78 kg) without accessories
- Warranty
- 5 years mechanical, 15 years on the frame and the welds
This product has been discontinued
It is no longer available to order. See what we carry today, or contact us and we will help you find the right match.
Description
The Rexx bed is the low deck in Span-America's Q-Series: 7-7/8 in to 26 in from the floor to the mattress support, moving almost straight up and down, so it keeps its footprint as it rises rather than rolling across the room.
This model has been discontinued.
Two deck lengths share the same frame: 80 in as QD2000 and 76 in as QD2000Y. Both are 35 in wide, and both take the maker's tool-less 42 in expander kit.
Span-America covers the mechanical parts for 5 years and the frame and welds for 15 years.
What the deck does
- The decks are precision welded orthopedic grids with a smooth upper surface, powder-coated in the maker's anti-microbial polyester finish so they wipe down between residents.
- Back elevation runs 0 to 70 degrees and knee elevation 0 to 20 degrees. The vascular foot rest ratchets up on its own, without pillows or folded bedding under the legs.
- Retainers at the four corners hold the mattress where it is put, and honeycomb roller bumpers take the wall instead of the paintwork.
Sizes and access
- 35 in x 80 in, item QD2000, the standard long-term care deck.
- 35 in x 76 in, item QD2000Y, the shorter deck for a tighter room.
- Overall length is 84-1/2 in or 88-1/2 in, set by the deck. Both decks widen to 42 in with the maker's expander kit, which adds six deck sections and needs no tools, bolts or pins.
Where it fits
- It sits with the other long-term care beds we carry, and with the wider bed accessories range.
- The Span America Advantage bed is the other Q-Series bed we stock, and the same expander kit fits both models.
- Accessories for this bed include three-position pivot assist rails, a fixed assist rail, half head end side rails and service dollies.
Frequently asked questions
What deck lengths does the Rexx come in?
Two: a 35 in x 80 in deck as item QD2000 and a 35 in x 76 in deck as item QD2000Y. Both are 35 in wide and both take the maker's 42 in expander kit.
Does the bed travel across the floor as it rises?
The bed adjusts vertically with virtually no horizontal motion, which keeps it in the same spot against the wall as a resident is raised or lowered.
Can staff lock the controls?
The pendant controller is standard. The optional foot-end control carries a staff-only lockout.
Is the Rexx still in production?
No. It has been discontinued.
Funding may help: see who may help pay.
Specifications
- Weight capacity
- Safe working load 450 lb (204 kg)
- Product weight
- 170 lb (78 kg) without accessories
- Compatible rails
- Three-position pivot assist, fixed assist and half head end side rails
- Hand pendant
- Pendant controller standard; optional foot-end control with staff-only lockout
- Bed width
- 35 in; 42 in with the maker's tool-less expander kit
- Bed length
- Sleep surface 80 in or 76 in; overall length 84-1/2 in or 88-1/2 in, set by the deck
- Size options
- 35 in x 80 in deck (QD2000) or 35 in x 76 in deck (QD2000Y)
- Minimum bed height
- 7-7/8 in from the floor to the mattress support
- Maximum bed height
- 26 in from the floor to the mattress support
- Deck sections
- Precision welded orthopedic grid decks with a smooth upper surface
- Section angles
- Back elevation 0 to 70 degrees; knee elevation 0 to 20 degrees
- Bed accessories
- 42 in tool-less expander kit, service dollies, head and foot boards, trapeze
- Sold as
- One bed frame with its pendant controller; mattress, rails and boards are separate items
- Available colours
- Seven finishes and eight head and foot board profiles in the maker's range
- Material
- Metal components powder-coated in the maker's anti-microbial polyester finish
- Warranty
- 5 years mechanical; frame and welds 15 years
- Product type
- Low long-term care bed in the Span-America Q-Series
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







