Skip to content
Skip to Content Skip to main content
Showroom hours

ADP registered vendor. Help with ODSP, Disability Can, WSIB, VA and IFHP. ADP registered vendor. See how we help

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Beka

Beka Avero Motion E side-entry care bathtub

The Beka Avero Motion E is a side-entry care bathtub. A partly mobile resident can walk in through the door at the side, sits on the moulded seat, and the tub tilts back 23 degrees to bring them into the bathing position. Everything runs from a cable remote control. BEKA Hospitec builds it for Savaria Patient Care in Canada.

Key specifications All specifications
Product type
Bathing System
Weight capacity
772 lbs (350 kg) with the patient and the water; 485 lbs (220 kg) maximum patient
Seat height
19.3" to 27.2" (490-690 mm) boarding height; 31.9" to 39.8" (810-1010 mm) at working height
Height adjustment
Electric, 7.9" (200 mm) of lift, plus a 23 degree tilt into the bathing position
Overall length
69.3" (1760 mm) in the entry position; 75.1" (1908 mm) tilted back
Overall width
33.9" (860 mm) outside; 24.4" (620 mm) inside at the bottom, 26.8" (680 mm) at the top
Overall height
75.6" (1920 mm) with the door open
Water capacity
About 270 L (71.3 gal) to fill; 98 L (25.9 gal) already sits in the foot area before it tilts back; about 185 L of water per bath
Backrest
Moulded seat with a special back profile to stop slipping as the tub tilts back
Uses
Bathing a resident in a care home; a partly mobile resident walks in through the side door
Assembly
Delivered ready to use; levelled on its screw legs with a wrench; connected through 1/​2 inch hoses with dirt filters on the water supply
Material
Glass-fibre reinforced plastic tub body
$ 35,637.18 $ 35,637.18

What is included?

The tub with its moulded seat, hygiene opening and ergonomic handles, and the cable remote control that is standard on the Motion E. The emergency function for a power failure, automatic tub filling, the air-jet whirlpool, the music system, colour light therapy, the disinfection system and the neck pillow are options; your quote lists the ones fitted.

Offers and rewards Applied in your cart at checkout.
  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
810150540
Brand
Beka
Category
Bathing System
Barcode 810150540 810150540

Description

The Beka Avero Motion E is a side-entry care bathtub. A partly mobile resident walks in through the side door, sits on the moulded seat, and the tub tilts back 23 degrees into the bathing position. Everything runs from a cable remote control.

This tub is quoted with its options and installation, so the price depends on the fitted equipment.

What does it do and how does it work?

  • Entry: a side door at a boarding height of 19.3 to 27.2 in (490 to 690 mm).
  • Movement: electric lift of 7.9 in (200 mm) plus a 23 degree tilt, from the cable remote.
  • Size: 33.9 in wide, 69.3 in long in entry and 75.1 in tilted back, 75.6 in high with the door open.
  • Water: 98 L pre-fills the foot area, about 270 L to fill, draining at 75 L a minute.
  • Build: glass-fibre reinforced plastic body, moulded seat with an anti-slip back profile, hygiene opening and handles.
  • Safety: double scalding protection, set mechanically on the thermostatic mixer.
  • Capacity: 772 lb (350 kg) with patient and water; 485 lb (220 kg) maximum patient.

Who is it for, and who should choose something else?

  • For bathing residents in a care home, including a partly mobile resident who can walk in through the side door.
  • The maker rates it for mobility groups 1 to 3, and group 4 only with a transfer hoist.
  • For an ordinary tub with a lifting seat, choose a bath lift.

Will it fit?

  • It needs a level floor, a 120 V power supply and hot and cold water, connected through 1/2 in hoses with dirt filters.
  • Boarding height runs 490 to 690 mm and working height 810 to 1010 mm at the front.
  • Check the room for the 860 mm width and the 1920 mm height with the door open.

Using it day to day

  • Set the hot and cold mixer and its scalding limit before the first bath, then pre-fill the foot area.
  • A carer tilts the tub back 23 degrees, bathes the resident at working height, then drains it.
  • Wipe with a soft cloth and soapy water or a plastic cleaner, and disinfect after each use.
  • Never use an abrasive cleaner; surface damage from aggressive cleaning is excluded from cover.

What does it work with, and what are its limits?

  • It carries a 350 kg safe working load with patient and water, and no more than 220 kg of patient.
  • Emergency power-failure function, automatic filling, whirlpool, music, colour light, disinfection and a neck pillow are options.
  • It is delivered ready to use and levelled on its screw legs; installation and options are quoted.
  • Bathroom safety items are non-returnable under our return policy once used.

How does it compare?

This is a fixed care tub a resident walks into under bathing systems; the Niagara is another fixed tub, and a bath lift works with an ordinary tub.

Frequently asked questions

Does the tub tilt back on its own?

The carer tilts it back 23 degrees from the cable remote control.

Can a resident get in without being lifted?

Yes for a partly mobile resident; the side door opens at a 490 mm entry height.

How much water does a bath take?

About 270 L to fill, with 98 L already in the foot area before the tub tilts back.

Does it need a hoist in the room?

Not for mobility groups 1 to 3. Group 4 residents need a transfer hoist, and the open base frame lets one reach over the tub.

Funding may help: see who may help pay.

Specifications

Weight capacity
772 lbs (350 kg) with the patient and the water; 485 lbs (220 kg) maximum patient
Product weight
386 lbs (175 kg) without packaging
Assembly
Delivered ready to use; levelled on its screw legs with a wrench; connected through 1/2 inch hoses with dirt filters on the water supply
Backrest
Moulded seat with a special back profile to stop slipping as the tub tilts back
Seat height
19.3" to 27.2" (490-690 mm) boarding height; 31.9" to 39.8" (810-1010 mm) at working height
Height adjustment
Electric, 7.9" (200 mm) of lift, plus a 23 degree tilt into the bathing position
Overall width
33.9" (860 mm) outside; 24.4" (620 mm) inside at the bottom, 26.8" (680 mm) at the top
Overall height
75.6" (1920 mm) with the door open
Overall length
69.3" (1760 mm) in the entry position; 75.1" (1908 mm) tilted back
Uses
Bathing a resident in a care home; a partly mobile resident walks in through the side door
Water resistance
Tub IPX4; cable remote control IPX6
Water capacity
About 270 L (71.3 gal) to fill; 98 L (25.9 gal) already sits in the foot area before it tilts back; about 185 L of water per bath
Material
Glass-fibre reinforced plastic tub body
Product type
Bathing System

Options and sizes can change some figures. Ask us to confirm yours before you order.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Mobility store warranty terms

These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.

1 year on parts.

Read the warranty and service policy for the full terms.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.