Description
Blake Medical's Geo-Matrix Hybrid Low-Profile cushion is the lower version of the Geo-Matrix Hybrid: the same gel and foam build, 2.5 inches (64 mm) high instead of 3.5 inches (89 mm).
Browse wheelchair cushions.
Who is it for?
- It suits a person who needs a low seat-to-floor height to propel a manual wheelchair with their feet, and who Blake describes as needing moderate postural support with gentle positioning and contouring.
- Nor is it for a user above 250 lbs (113 kg) unless the uprated version is ordered.
- Choose the right cushion in a seating assessment with an occupational therapist or physiotherapist.
Will it fit?
- Match the cushion to the seat and to the person rather than to the wheelchair's nominal size.
- Blake's manual says the cushion should be the same width as the seat, and that it may be up to 1 inch (2.5 cm) wider when it sits against armrests or side guards.
How does it work?
- Nothing needs inflating or adjusting.
- The two cushions share the same gel and foam construction and the same cover options; they differ in height and in capacity, 250 lbs (113 kg) here against 275 lbs (125 kg) for the standard Hybrid.
What are the care limits?
- The cushion carries an inner Elastatex cover that is breathable, wipeable, antibacterial and fluid proof, plus an outer cover that Blake offers in two fabrics: a breathable Spacetex with incontinence protection, or an Elastatex soft touch outer with incontinence protection.
- The bonded gel layer cannot go in a washing machine, so the cushion itself is wiped rather than washed.
- Standard Geo-Matrix Hybrid: a 3.5-inch (89 mm) profile rated to 275 lbs (125 kg).
What else compares?
Frequently asked questions
What if I need a weight capacity above 250 lbs (113 kg)?
Blake lists an upgraded 160 kg build on request. The standard cushion is rated to 250 lbs (113 kg).
Can I order a custom width or depth?
Yes. Blake offers custom dimensions; confirm the assessed seat measurements and cover choice in the quote.
Could this change the wheelchair's balance?
Yes. Blake warns a cushion can change the chair's centre of gravity, so have anti-tip needs checked during the seating assessment.
What should you know?
Funding may help: see who may help pay.
Used cushions and custom orders are non-returnable; see our return policy.
Specifications
- Weight capacity
- 250 lbs (113 kg), with a 353 lbs (160 kg) version on request
- Seat width
- 16", 18", 20" or 22" (406 to 559 mm)
- Seat depth
- 16", 18", 20" or 22" (406 to 559 mm)
- Cushion height
- 2.5" (64 mm); about 1" (25 mm) lower than the standard Geo-Matrix Hybrid
- Sizes
- 16 standard sizes from 16" x 16" to 22" x 22" (width x depth)
- Construction
- Cascading gel pillow top over a dual high-density foam core on a closed cell foam base
- Cover
- Breathable Spacetex or Elastatex soft touch outer cover, with an inner Elastatex fluid-proof cover
- Cover care
- Wipe daily with soap and water; machine wash covers up to 60 degrees C, lay flat to dry, no bleach
- Custom sizes
- Any width and depth, made to order
- Mounting hardware
- Self-adhesive hook strips on the cushion base
- Product type
- Gel and foam wheelchair cushion
- Use category
- Moderate risk; moderate postural support
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
1 year on parts.
Read the warranty and service policy for the full terms.
Compare similar products
Other models worth a look before you decide.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
