JAY Lite Cushion, 3.15 Inch Foam, Optiwell Base
The JAY Lite is a lightweight foam wheelchair cushion from Sunrise Medical's JAY range, made for a wheelchair user who wants skin protection and mild postural support without the weight of a gel or air cushion. Sunrise builds it around a pre-contoured foam base with an Optiwell pelvic loading area, a reticulated foam insert and a removable 3DX microclimatic cover. It stands 3.15 inches (80 mm) high, weighs 1.5 to 2.4 lbs (660 to 1,090 g), and carries a 250 lbs (113 kg) rating. Sunrise has discontinued the JAY Lite; the JAY LitePro is a different cushion, not this one renamed.
- Product type
- Foam wheelchair cushion
- Use category
- Skin protection
- Weight capacity
- 250 lbs (113 kg)
- Cushion weight
- 1.5 to 2.4 lbs (660 to 1,090 g)
- Seat width
- 14 to 20 inches (355 to 508 mm)
- Cushion height
- 3.15 inches (80 mm)
This product has been discontinued
It is no longer available to order. See what we carry today, or contact us and we will help you find the right match.
Description
Sunrise Medical has discontinued the JAY Lite foam wheelchair cushion.
Explore current wheelchair cushions with the person's seating therapist.
Who used the JAY Lite?
- It was rated for skin protection and mild positioning in a lightweight foam design.
- It is rated for a user up to 250 lbs (113 kg). A seating assessment by an occupational therapist or physiotherapist determines the next cushion.
How was the fit checked?
- Measure seated hip width and the distance to the back of the knees. The cushion should stop 1 to 2 inches (2.5 to 5 cm) before the knees.
- It came in widths and depths from 14 to 20 inches (35 to 50 cm), with an 8 cm (3.15 inch) height. Check the actual width and depth pair against the existing cushion label.
What should an existing owner know?
- The pre-contoured foam base holds a reticulated foam insert beneath a removable 3DX outer cover. No air or fluid level needs adjustment.
- Wipe the base with a damp cloth without soap; never submerge it. Machine wash the cover warm, then drip dry or tumble dry low.
- Let a cushion stored below 5°C (40°F) reach room temperature before use.
What current designs can you compare?
- JAY J2 Deep Contour: a foam and fluid cushion with a deep pelvic well.
- Geo-Matrix Hybrid: gel over contoured foam.
What about funding and support?
Funding for an assessed replacement may help: see who may help pay.
Used cushions are non-returnable under our return policy. For an existing JAY Lite, the base is covered for 24 months and the cover for 6 months; see warranty service.
Frequently asked questions
Can I order a new JAY Lite?
No. It has been discontinued.
Is JAY LitePro the same cushion?
No. LitePro is a different model, so its fit and support must be assessed before it replaces a JAY Lite.
Can the foam base go in the washing machine?
No. Wipe the foam with a damp cloth and let it air dry fully; machine washing is for the removable outer cover.
Specifications
- Weight capacity
- 250 lbs (113 kg)
- Product weight
- 1.5 to 2.4 lbs (660 to 1,090 g)
- Seat width
- 14 to 20 inches (355 to 508 mm)
- Seat depth
- 14 to 20 inches (355 to 508 mm)
- Cushion height
- 3.15 inches (80 mm)
- Construction
- Pre-contoured Olotex foam base with an Optiwell pelvic loading area, ischial well cutouts and a sacral notch; reticulated foam insert in an air flow cover
- Cover
- Removable 3DX microclimatic cover; optional PU foam insert with a water-resistant incontinent cover
- Cover care
- Cover inside out, machine wash warm at 60 C, drip or tumble dry low; no iron, bleach, dry clean or industrial washers
- Warranty
- 24 months on the base, 6 months on the removable cover; punctures, tears and burns not covered
- Product type
- Foam wheelchair cushion
- Use category
- Skin protection
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







