Skip to content
Skip to Content Skip to main content
Showroom hours

ADP registered vendor. Help with ODSP, Disability Can, WSIB, VA and IFHP. ADP registered vendor. See how we help

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Future Mobility Healthcare

Max Air Backrest

The Max Air Backrest is Future Mobility Healthcare's air back for a wheelchair user who needs side support with some give in it. A foam base carries a lateral insert and a lumbar insert that are inflated through a tube and hand bulb, so the support can be softened or firmed once the person is sitting in the chair. The maker raises the laterals for support higher on the trunk and gives them 6 inches of side support. It is built in Mississauga, Ontario, and offered here in the bariatric widths, 21 to 24 inches, with a choice of cover colours. A seating assessment with an occupational therapist or physiotherapist sets the size and how much air the inserts carry.

Key specifications All specifications
Sizes shown
Bariatric widths 21" to 24" by 16" to 20" high
Inserts
Lateral (MABLT) and lumbar (MABLB); either can be left off the order
Construction
Aluminum shell with a foam base and adjustable air inserts
Lateral support
6" (152 mm), raised for support higher on the trunk
Cover colours
Black, Dark Green, Navy Blue, Royal Blue or Burgundy
User weight
No figure published by the maker
Quote only

Priced by quote: your written quote confirms current pricing, options and availability.

What is included?

The back with its cover, the lateral and lumbar inserts, the tube and hand bulb shown in the maker's photos, the quick release hardware kit (two mounting plates, two cane clamps, four cane inserts, the adjustment and clamp screws and two backing plates) and the user manual. A matching spare cover, standard width from 14 to 20 inches, custom size or headrest mount requires a separate exact-part seating quote.

  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
Brand
Future Mobility Healthcare
Category
Foam Backrests

Description

The Max Air Backrest is Future Mobility Healthcare's air insert back: a foam-based back with raised laterals and lateral and lumbar inserts that are inflated through a tube and hand bulb.

What does it do and how does it work?

  • Air inserts: a lateral insert (MABLT) sits on each side and a lumbar insert (MABLB) across the lower back; the air level is set with the hand bulb while the person is seated.
  • Raised laterals: the maker gives 6 in (152 mm) of lateral support, placed higher on the trunk.
  • Base: an aluminium shell with a foam base and about 4 in (102 mm) of cover and foam layers.

Who is it for, and who should choose something else?

  • Adjustable support: for a person whose side support has to be softened or firmed after the chair is set up, with support placed higher on the trunk.
  • Bariatric widths: 21 to 24 in; standard 14 to 20 in widths need a separate quote.
  • Assessment first: an occupational therapist or physiotherapist sets the size and the air level.

Will it fit?

  • Sizes: 21x16, 21x18, 21x20, 22x16, 22x18, 22x20, 23x16, 23x18, 23x20, 24x16, 24x18 and 24x20 in (width x height).
  • Custom: a bariatric custom width up to 24 in is made by quote.
  • Back posts: clamps fit 1 in (25 mm) posts, with inserts for 7/8 in (22 mm); ask about 3/4 in.
  • Chair width: standard pins fit the same width; extension pins for a 1 or 2 in wider frame are separate.
  • User weight: Future Mobility publishes no user weight figure for the Max Air; ask us to confirm before ordering.

Using it day to day

  • Mounting: a cane clamp on each post, a plate on each clamp, and the upper pins drop into hooked slots while the lower pins snap into latches.
  • Removal: the release levers eject the lower pins so the back lifts out; the clamps stay on the chair.
  • Adjustment: height on the posts, with alternate slots adding 7/8 in (22 mm); depth over 5 in (127 mm); angle 15 degrees forward to 20 back, set seated; a recessed position reduces rearward stability.
  • Headrest: three sets of holes take the adaptor bracket, which shifts about 1.5 in (38 mm); the mount is separate.
  • Care: remove the inserts, wash the cover cold on a gentle cycle, no bleach or softener, air dry in the shade; wipe the base.

What does it work with, and what are its limits?

How does it compare?

The Prism Air is the base air back without raised laterals, the Max Ultra has foam laterals, and the wheelchair backrests hub lists the range.

Frequently asked questions

Can I order a 16 or 18 in wide Max Air?

Standard widths from 14 to 20 in need a separate quote; the listed sizes run 21 to 24 in.

How are the inserts inflated?

Through a tube and hand bulb, while the person is seated; the pocket on the back of the cover holds the tube and bulb between adjustments.

Will the clamps fit my back posts?

They fit 1 in (25 mm) posts as supplied, with inserts for 7/8 in (22 mm); ask us about 3/4 in posts.

Mobility Specialties is an ADP registered vendor; see how we can help.

Specifications

Sizes
Bariatric widths 21 to 24 in, each at 16, 18 or 20 in high
Construction
Aluminum shell with a foam base; lateral insert (MABLT) and lumbar insert (MABLB) filled with air through a tube and hand bulb
Cover
4-way stretch cover or moisture-resistant infection control cover; a pocket on the back holds the tube and bulb
Cover care
Remove the inserts, then machine wash cold on gentle with mild detergent; no bleach or fabric softener; air dry in the shade, no dryer
Adjustments
Height on the back posts; depth over 5" (127 mm); angle 15 degrees forward to 20 degrees back; the air level is set with the hand bulb while the user is seated
Custom sizes
Bariatric custom widths to 24 in (610 mm) by quote
Back width
21, 22, 23 or 24 in (533 to 610 mm), bariatric sizes
Back height
16, 18 or 20 in (406, 457 or 508 mm), bariatric sizes
Lateral support
6 in (152 mm) under the raised laterals
Mounting hardware
Quick-release plates with cane clamps for 1" (25 mm) back posts; inserts included for 7/8" (22 mm) posts
Fits wheelchair widths
Same width as the back with standard pins; frames 1" or 2" (25 or 51 mm) wider with extension pins, sold separately
Available colours
Black, dark green, navy blue, royal blue and burgundy covers
Warranty
3 years on the back, 1 year on hardware, 90 days on the cover; original purchaser
Product type
Air insert wheelchair back with raised laterals, aluminum shell with foam
Use category
Postural support; raised laterals with lateral and lumbar air inserts

Options and sizes can change some figures. Ask us to confirm yours before you order.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Warranty details

Future Mobility Healthcare warrants the Max Air back to be free from defects in materials and workmanship under normal use by the original purchaser.

  • Back: 3 years.
  • Hardware: 1 year.
  • Cover: 90 days.
  • Covers the original purchaser only. Defective parts are repaired or replaced at Future Mobility's discretion; labour and shipping are not included.
  • Excludes normal wear, not following the instructions, negligence, accident, improper use, maintenance or storage, and unauthorized parts, modifications or repairs.
  • Claims go through the dealer that sold the back.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.