Description
The Drive replacement tips, item RTL10386GB, are grey rubber tips for a walker leg with a 1-1/8 in (28.6 mm) outside diameter.
What does it do, and how is it built?
- Each tip slides over the end of a walker leg, so the bare metal no longer meets the floor.
- On Drive two-wheel walkers 10220-2WW and 10223-2WW, this tip goes on the two rear legs.
- One tip comes in a retail blister pack, and the factory packs 10 blisters to a case.
- The tip is grey rubber.
Which walkers and products does it fit?
It fits a 1-1/8 in (28.6 mm) tube, Drive item 10386G-8, and the Drive 11117N-1 Bariatric Folding Commode.
- Rear legs only on 10219FRD-1, 10220-2WW, 10221FRD-1, 10222FRD-1, 10223-2WW, 10228, 10231 and 10232.
- It is also the tip for Drive walkers 10200, 10201, 10202, 10203, 10213, 10220, 10220HD, 10223 and 10248.
- Drive commodes 11105N, 11125PS, 11130 and 11132, and safety frame 12001, take this tip too.
- For a 7/8 in (22.2 mm) leg, order RTL10390GB. The pair pack for this tube is 10386G-8, eight pairs to a case.
- Measure across the outside of the leg. One pack is one tip, so those two-wheel walkers need two.
How do I fit it?
- Pull the worn tip off the leg.
- Push the new tip fully onto the leg until it seats.
- Check that the tip sits square and does not rock.
What are its limits?
- One tip is one pack; no tools or bolts are included.
- For another maker's walker, match the 1-1/8 in leg measurement before you order.
How does it compare?
- Walker accessories lists the other parts we sell.
- Two-wheel walkers shows the walker type these tips fit.
- The Drive two-wheeled walker with seat is a different model. Match the leg size before using this tip on it.
Frequently asked questions
Will this tip fit my walker?
It fits a leg that measures 1-1/8 in (28.6 mm) across the outside. Check the leg before you order.
Does this tip fit the Drive bariatric folding commode?
Yes. The 11117N-1 commode is the only non-walker product named for this tip.
Will it fit another brand's walker?
A 1-1/8 in leg is that width whatever the brand. Measure your leg; this tip is listed for the Drive parts above.
Funding may help: see who may help pay.
Specifications
- Available colours
- Grey
- Size
- 1-1/8 in (28.6 mm) outside diameter
- Mounting
- Rear legs only on 10219FRD-1, 10220-2WW, 10221FRD-1, 10222FRD-1, 10223-2WW, 10228, 10231 and 10232
- Compatible with
- Item 10386G-8; walkers 10200, 10201, 10202, 10203, 10213, 10220, 10220HD, 10223, 10248; commodes 11105N, 11117N-1, 11125PS, 11130, 11132; frame 12001
- Pack size
- One tip in a retail blister pack
- Item number
- RTL10386GB
- Case pack
- 10 blister packs per case
- Product type
- Replacement walker tip (glide)
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Mobility store warranty terms
These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.
1 year on parts.
Read the warranty and service policy for the full terms.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
