Description
The Drive Gravity 7 is a 6 in (15 cm) non-powered foam mattress replacement, 36 in wide, in 76, 80 or 84 in lengths, rated 350 lbs (159 kg), with or without raised side edges.
What does it do and how does it work?
- Three full layers of latex-free foam make up the mattress.
- The full-width top layer is die-cut for zoned pressure redistribution.
- The heel area is a visco foam section, and the bottom layer has horizontal scored articulation cuts.
- High-density foam perimeters give edge support; raised side edges are optional foam bolsters.
- The removable cover is fluid resistant, low shear and vapour permeable.
Who is it for, and who should choose something else?
- A person up to 350 lbs (159 kg) who needs a foam replacement, not a topper or a powered surface.
- Someone who needs a 400 lb rating or a sloped heel should choose the Gravity 8.
- A bariatric deck needs a wider mattress; the Gravity 7 is 36 in wide.
Will it fit?
- Width 36 in (91 cm), height 6 in (15 cm); lengths are 76 in (193 cm), 80 in (203 cm) or 84 in (213 cm).
- Item 15770 is 36 by 80 in without raised side edges; 15777 adds them, and 15784, 15785, 15876 and 15877 cover the other length and edge choices.
- The 350 lbs (159 kg) limit is the same for every size; the bed frame's own safe working load applies if it is lower.
- Raised side edges are foam bolsters, not rails. At 6 in high, recheck the gaps to any rails. Health Canada recommends gaps under 120 mm (4 3/4 in) within and under the rail, and under 60 mm (2 3/8 in) at the rail ends. See bed rails.
- A mattress that has touched skin cannot be returned, so measure first. See the return policy.
Using it day to day
- Wipe the removable cover clean and check the foam at each linen change.
- Replacements are 15770C, 15777C, 15784C, 15785C, 15876C and 15877C, one per part number.
- Rotate the mattress head to foot when the deck allows, so the foam wears evenly.
What does it work with, and what are its limits?
- It is a non-powered foam mattress: no pump, alternating cycle or low air loss.
- Raised side edges do not restrain anyone and are not a substitute for rails.
- Warranty is seven years limited on the foam and three years on the cover; see the Warranty tab.
How does it compare?
- Gravity 8: 400 lbs, a channel-cut heel slope and a 10 year foam warranty.
- Gravity 9: a four-layer build rated 450 lbs.
- Foam mattresses: the wider range.
Frequently asked questions
Is this a replacement mattress or a topper?
A replacement mattress for the bed deck, 6 in thick, not a pad over another mattress.
What are the raised side edges made of?
Foam bolsters built into the mattress; they are not bed rails and do not restrain anyone.
Does the Gravity 7 need a pump?
No. It is foam only, with no pump, cycle, power cord or alarm.
Which length fits my bed?
Measure the deck: 76, 80 and 84 in lengths are sold under separate part numbers.
Funding may help: see who may help pay.
Specifications
- Weight capacity
- 350 lbs (159 kg)
- Construction
- 3 latex-free foam layers; die-cut top; visco heel section; scored base
- Cover
- Removable fluid-resistant, low-shear, vapour-permeable cover
- Cover care
- Wipe clean; replacement covers 15770C, 15777C, 15784C, 15785C, 15876C and 15877C
- Edge support
- High-density foam perimeter; raised side edges optional
- Mattress width
- 36" (91 cm)
- Mattress length
- 76" (193 cm), 80" (203 cm) or 84" (213 cm)
- Mattress height
- 6" (15 cm)
- Warranty
- Foam 7 years limited; cover 3 years
- Product type
- Foam Mattress
Options and sizes can change some figures. Ask us to confirm yours before you order.
Documents
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Warranty
Warranty details
Drive Medical warrants the Gravity 7 pressure redistribution mattress (15770 family), bought new, against defects in materials, workmanship and assembly. The warranty covers the original purchaser only.
- Foam: 7 years.
- Cover: 3 years.
- Drive repairs, replaces or refunds at its option; labour and shipping are not included.
- Follow the cleaning instructions and inspect the mattress inside and out at least every 3 months.
- Excludes custom sizing or other changes to the foam or cover, negligence, accidents, sharp objects and tears, fire, improper storage, use without the cover or with a damaged cover, and unauthorized repairs or modifications.
Compare similar products
Other models worth a look before you decide.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.







