Skip to Content Skip to main content Skip to content
Showroom hours

ADP registered vendor. Help with ODSP, March of Dimes, WSIB, VA and IFHP. ADP registered vendor. See if you qualify

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Sunrise Medical

JAY X2 Cushion, Lightweight Fluid Wheelchair Cushion

$ 580.00 $ 580.00

  • Seat width
  • Seat depth

The JAY X2 Cushion is a lightweight foam and fluid wheelchair cushion that Sunrise Medical builds for active users who want skin protection without a tall profile: a non-contoured, high resiliency foam base 2.25" high carries a JAY Flow fluid tripad, and a dual cover system keeps moisture out of the foam.

  • Product type: Foam and fluid wheelchair cushion, the maker's own product type.
  • Height: 2.25" without positioning components.
  • Widths and depths: 14" to 20" wide and 14" to 20" deep, in 14 item numbers from JX21414 to JX22020.
  • Product weight: 3.8 lb at 16" x 16".
  • Weight capacity: 300 lb on the standard cushion under 22" wide, the maker's Canadian order form figure.
  • Base: Non-contoured, high resiliency foam with a rear coccyx notch and a flat base that lets the client sit at the front edge.
  • Insert: Maintenance-free JAY Flow fluid tripad.
  • Cover: Dual cover system: a water-resistant inner cover with a water resistant zipper and anti-wicking seam, and a machine washable stretch outer cover.
  • Positioning: Optional 1" lateral thigh supports; the order form also adds 1" tall lateral, medial and pelvic pieces.
  • Custom sizes: The rest of the maker's 12" to 22" matrix is a JAY Your Way order, with an M in front of the part number.
Weight capacity
300 lb on the standard cushion under 22" wide, the maker's Canadian order form figure
Seat width
14" to 20", in 14 item numbers
Product weight
3.8 lb at 16" x 16"

What is included?

The cushion with its JAY Flow fluid insert fitted, the water-resistant inner cover and the stretch outer cover. Positioning components, an extra cover and fluid volume changes are ordered separately.

Mobility Specialties is an ADP registered vendor. Funding may help: see who may help pay.

Offers and rewards Applied in your cart at checkout.
  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
Brand
Sunrise Medical
Category
Cushions
Barcode SE0001155 SE0001155

Description

The JAY X2 is a lightweight foam and fluid cushion for active wheelchair users: a flat foam base 2.25" high with a JAY Flow fluid tripad on top, in a reduced profile that keeps the seat-to-floor height.

What is the JAY X2 cushion?

  • A non-contoured, high resiliency foam base with a rear coccyx notch and a flat base, so the client can sit at the front edge during daily tasks.
  • A maintenance-free JAY Flow fluid tripad that conforms beneath the bony prominences; there is no fluid to top up.
  • 3.8 lb at 16" x 16", and 300 lb capacity on the standard cushion under 22" wide per the maker's Canadian order form.

Which size do I order?

  • Widths 14" to 20" and depths 14" to 20", in 14 item numbers: JX21414 (13.75" x 14"), JX21616 (15.75" x 16"), JX21717 (17.25" x 17"), JX21820 (17.75" x 20.25") and JX22020 (19.75" x 20") among them.
  • Measure the widest point across the seated hips, and the depth from the back of the seat to about 1" short of the back of the knees. A clinician fits the cushion.
  • Combinations outside the maker's standard offering are a JAY Your Way order, with an M in front of the part number; a special order is not returnable (see our return policy).

Living with the cushion

  • Wipe the water-resistant inner cover down and zip the stretch outer cover back over it; the outer cover takes a machine wash.
  • Check the skin under the cushion daily at first and stop using it if redness appears, and check the foam and covers monthly for wear.
  • A fault goes through warranty service; the maker prints no warranty period for this cushion on its Canadian page.

What else compares?

Frequently asked questions

Who is the JAY X2 cushion for?

Active users who need fluid skin protection in a low profile, so the seat-to-floor height stays.

Does the fluid need topping up?

No. The JAY Flow fluid tripad is a sealed, maintenance-free insert; the order form can change its volume at build.

What are the two covers for?

The inner cover keeps moisture out of the foam with a water resistant zipper, and the stretch outer cover zips over it and is machine washable.

Can lateral support be added?

Yes: 1" lateral thigh supports, or 1" tall lateral, medial and pelvic pieces, ordered with the cushion.

What should you know?

Mobility Specialties is an ADP registered vendor; see how ADP works with us.

Specifications

Weight capacity
300 lb on the standard cushion under 22" wide, the maker's Canadian order form figure
Product weight
3.8 lb at 16" x 16"
Seat width
14" to 20", in 14 item numbers
Seat depth
14" to 20", in 14 item numbers
Sizes
JX21414 13.75" x 14"; JX21616 15.75" x 16"; JX21717 17.25" x 17"; JX21820 17.75" x 20.25"; JX22020 19.75" x 20", as measured by the maker
Custom sizes
The rest of the maker's 12" to 22" matrix through JAY Your Way, ordered with an M in front of the part number
Height
2.25" without positioning components
Base
Non-contoured, high resiliency foam with a rear coccyx notch and a flat base
Made by
Sunrise Medical, under the maker's JAY brand
Positioning
Optional 1" lateral thigh supports; 1" tall lateral, medial and pelvic pieces on the order form
Insert
Maintenance-free JAY Flow fluid tripad
Inner cover
Moisture-resistant, with a water resistant zipper, anti-wicking seam thread and built-in modular thigh support compartments
Outer cover
Stretch, machine washable, zipper enclosure
Cover options
X-static with Stretch, Incontinent and Microclimatic
Fluid options
Active Fluid Bladder 40% larger, and fluid volume or obliquity overfill and underfill
Product type
Foam and fluid wheelchair cushion, the maker's own product type
Use category
Lightweight, reduced profile skin protection for active users

Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Mobility store warranty terms

These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.

1 year on parts.

Read the warranty and service policy for the full terms.

Funding

Funding may help pay for this

Mobility Specialties is an ADP registered vendor. Funding may help: see who may help pay.

See who may help pay

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.

Not sure where to start?

Talk to a specialist. No pressure, no obligation.

Book a free visit