Description
Joerns part 11011867AL is the standard wall bumper for the WeCare full-electric bed. It sits on the bed leg and stops the frame from reaching the wall behind it. Browse bed accessories.
Who it suits, and who it does not
- Replacing a bumper that has cracked, pulled off or gone missing on a Joerns WeCare bed.
- A bed placed head end to a wall, where the frame needs a little clearance.
- Not for a bed used in Trendelenburg: Joerns lists a longer bumper for that, 11011899AL.
How it fits
- Joerns fits the bumper by placing it as shown in the WeCare manual, then tapping it home with a rubber mallet or pressing it firmly with the sole of a shoe until it locks.
- No screws and no other tools. Joerns shows the same style of bumper coming off by tapping the tangs either side of the leg with a mallet.
- Joerns recommends the longer bumper when a bed is used in Trendelenburg or reverse Trendelenburg, so the wall stays protected through the full tilt.
Which Joerns beds take it
- Joerns lists 11011867AL on the WeCare full-electric bed. That list is the only Joerns parts list this session found the number in.
- Other Joerns frames carry their own wall bumper numbers with their own lengths. The EasyCare, for example, lists 11012608AL for the 12 degree Trendelenburg position.
- Joerns does not state how many bumpers one bed takes, so we confirm your bed's model and count before you order.
Compare
- Joerns WeCare full-electric bed: the frame this bumper is listed for.
- Joerns Care 100: another Joerns bed in our range.
Frequently asked questions
Can I fit a wall bumper myself?
Yes. It presses onto the bed leg and locks in place, and Joerns suggests a rubber mallet to seat it. Nothing is bolted on.
How many bumpers does one bed need?
Joerns' documents show the bumper fitted at setup but do not give a count per bed. Tell us your bed model and we will confirm how many to send.
Does this bumper fit an EasyCare or UltraCare bed?
Joerns lists this number on the WeCare bed, and gives the EasyCare its own bumper numbers by bed length and control type. We check your bed's label before ordering.
Will it still protect the wall if the bed tilts?
For Trendelenburg and reverse Trendelenburg, Joerns points to the longer bumper 11011899AL on the WeCare bed rather than the standard one.
Funding may help: see who may help pay.
Joerns publishes no warranty term for this part in the documents we read, so we confirm it with you before you order.
Specifications
- Sold as
- One bumper, Joerns part 11011867AL
- Mounting
- Presses onto the bed leg and locks; rubber mallet recommended
- Compatible with
- Joerns WeCare full-electric bed frame
- Longer version for Trendelenburg
- Joerns 11011899AL
- Product type
- Bed wall (baseboard) bumper
Figures from the manufacturer. Options and seat sizes can change them; we confirm yours before ordering.
Delivery and service
Delivery and setup
We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.
Service and repairs
Our technicians service what we sell, at home or in our shop.
Try before you buy
Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.
Questions about this product?
Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.
