Skip to content
Skip to Content Skip to main content
Showroom hours

ADP registered vendor. Help with ODSP, Disability Can, WSIB, VA and IFHP. ADP registered vendor. See how we help

Free in-home assessment across Toronto and the GTA. Free in-home assessment. Book a visit

Visit our showrooms in Etobicoke and Brampton. Showrooms in Etobicoke and Brampton. Find us

Service and repairs by our own team, at home or in store. Repairs by our own team. Request a repair

Blake Medical

Geo-Matrix Silverback Max Backrest

The Geo-Matrix Silverback Max Backrest is a rigid wheelchair back made by Blake Medical of Brantford, Ontario: an aluminum shell padded with 1.25 inch foam and a full layer of Geo-Matrix pillow top gel over a blue gel strip that runs the height of the spine. It is built for power and tilt wheelchair users and is described as the back for most clients, including people with an over-curved spine (kyphosis). It mounts on the wheelchair's back canes with Blake's quick-release hardware, adjusts for angle, height and depth on the chair, and lifts off in seconds. It comes in widths from 14 to 22 inches and in any custom width or height.

Key specifications All specifications
Use category
Skin protection, Blake's highest level in the Silverback line
Weight capacity
250 lbs (113 kg) at all degrees of tilt
Contour depth
Active 2.5" (64 mm), Deep 4" (102 mm) or Extra Deep 6" (152 mm)
Standard sizes
14, 16, 18, 20 or 22" (356 to 559 mm) wide by 16, 18 or 20" high, in three contours; part numbers combine M, width, height letter and contour letter
Construction
1.25" (32 mm) foam with a 3.75" (95 mm) wide gel spinal strip under a full pillow top gel layer
Warranty
Two years on the Silverback line of wheelchair backs
Quote only

Priced by quote: your written quote confirms current pricing, options and availability.

What is included?

The back (aluminum shell, foam, gel and its cover) with the bracket and pins already fitted, plus Blake's Silverback hardware set: a pair of mounting brackets, two stud plates, a pair of clamps, eight nuts and a set of 0.5 inch pins, with the installation instructions. Order the width, height, contour, a custom size, extra pins for a wider chair or a spare cover through a seating quote request.

  • Delivery and setup Across Toronto and the GTA: we set it up, show you how it works and service it at home or in our shop. Call (905) 798-1853
  • Safe checkout VISA Visa or Mastercard online, or pay in store when you visit us.
SKU
SBMAX
Brand
Blake Medical
Category
Gel Backrests
Barcode SBMAX SBMAX

Description

The Geo-Matrix Silverback Max is Blake Medical's rigid wheelchair back with an aluminum shell, 1.25 in (32 mm) foam, a blue gel spinal insert and a full pillow top gel layer.

Browse wheelchair backrests.

Who is it for?

  • It is the most protective back in the Silverback line, made for power and tilt wheelchairs; the line is rated to 250 lbs (113 kg) at all degrees of tilt.
  • Choose the right back in a seating assessment with an occupational therapist or physiotherapist.

Will it fit?

  • Widths: 14, 16, 18, 20 or 22 in (356 to 559 mm), with custom widths to order.
  • Heights: Standard 16 in, Tall 18 in or Extra Tall 20 in, with custom heights to order.
  • Contours: Active 2.5 in (64 mm), Deep 4 in (102 mm) or Extra Deep 6 in (152 mm).
  • Part numbers: M plus width, height letter and contour letter; M18TD is 18 in wide, tall height and deep contour.
  • Wider chairs: 0.5 in pins are standard; 1 and 1.5 in pins mount a narrower back on a wider chair, so a 16 in back fits an 18 in chair with 1.5 in pins.

How does it work?

  • The aluminum shell carries 1.25 in high-density foam, a 3.75 in (95 mm) wide blue gel strip that runs the full height of the spine, and a pillow top gel layer over the whole face; foam and gel together are 2 in (51 mm) thick.
  • The bracket and pins arrive fitted to the shell. The mounting hardware clamps to the back canes with a rubber grip, and the pins drop into the bracket slots and click into the locks.
  • Angle adjusts through 45 degrees, depth through 2 in (51 mm), and height adjusts on the chair; a set screw stops rotation.

What are the care limits?

  • The cover is a breathable four-way stretch fabric; a wipeable fabric is available at extra cost. Wash the cover up to 60°C (140°F), do not wring it, lay it flat to dry and do not bleach it.
  • Wipe the gel and foam with soap and water. The gel is light sensitive, so keep the back out of prolonged direct sun.
  • The Silverback line carries a two-year warranty; see warranty service.

How does it compare?

What should you know?

Funding may help: see who may help pay.

Custom and specially ordered backs are non-returnable; see our return policy.

Frequently asked questions

Which contour should I choose?

Active is 2.5 in deep, Deep is 4 in and Extra Deep is 6 in; the seating assessment decides how much side support the trunk needs.

Will a 16 inch back fit an 18 inch chair?

Yes, with 1.5 in pins. The standard pins are 0.5 in, and 1 in and 1.5 in pins are available for wider frames.

How does the back come off the chair?

The bracket and pins stay fitted to the shell; the pins release from the bracket locks so the back lifts off the cane clamps.

Specifications

Weight capacity
250 lbs (113 kg) at all degrees of tilt
Sizes
Five widths (14, 16, 18, 20, 22") by three heights (16, 18, 20") in three contours, plus custom
Construction
1.25" (32 mm) high-density foam with a 3.75" (95 mm) wide blue gel spinal insert under a full pillow top gel layer
Cover
Breathable four-way stretch fabric; wipeable fabric available at extra cost
Cover care
Wipe with soap and water; cover machine washable up to 60 C, do not wring, lay flat to dry, no bleach
Adjustments
Angle, height and depth adjusted on the chair; 45 degrees of angle and 2" (51 mm) of depth travel
Custom sizes
Any width and height, built to order by Blake
Back width
14", 16", 18", 20" or 22" (356 to 559 mm), custom widths by quote
Back height
16" (Standard), 18" (Tall) or 20" (Extra Tall), custom heights by quote
Contour depth
Active 2.5" (64 mm), Deep 4" (102 mm) or Extra Deep 6" (152 mm)
Mounting hardware
Blake Quick Release hardware: a pair of mounting brackets, two stud plates, a pair of clamps, eight nuts and a set of 0.5" pins
Fits wheelchair widths
Matches the back width with 0.5" pins; 1" and 1.5" pins mount a narrower back on a wider chair
Warranty
Two-year warranty on the Silverback line of wheelchair backs
Product type
Rigid wheelchair back, aluminum shell covered in foam and a Geo-Matrix gel insert
Use category
Skin protection, the highest level in Blake's Silverback line

Options and sizes can change some figures. Ask us to confirm yours before you order.

Documents

Delivery and service

Delivery and setup

We deliver and set up equipment across Toronto and the GTA, and show you how everything works. Custom and special-order products can take longer; we confirm timing with you before delivery.

Service and repairs

Our technicians service what we sell, at home or in our shop.

Try before you buy

Visit a showroom in Etobicoke or Brampton to try products first, or book a free home assessment.

Warranty

Mobility store warranty terms

These are Mobility's purchase and service policy terms, separate from any manufacturer warranty coverage.

1 year on parts.

Read the warranty and service policy for the full terms.

Questions about this product?

Talk to our team, try it in a showroom, or book a free home assessment. We help with sizing and funding.